Apr-01-2016 06:05 AM
Apr-05-2016 06:11 PM
Apr-05-2016 04:17 AM
Apr-04-2016 08:11 PM
Apr-04-2016 07:55 PM
Apr-04-2016 06:45 PM
Apr-04-2016 06:13 PM
Apr-04-2016 04:36 PM
Apr-01-2016 07:52 AM
Dale.Traveling wrote:
I think this was a one off and it was just the battery's time to go.
But also consider that when the Ready Brake activates and pulls on the brake pedal, even with the engine off and such, the toad brakes lights will be active. Normally this would not be a problem considering the short time the lights are powered. Get caught up in heavy stop and go traffic along with a marginal but functioning battery could be just enough to send it over the edge.
I'm pulling around an 05 CRV (No Nav) with a Ready Brake. The CRV comes along on any outing that isn't just a weekend trip. Battery hasn't been a problem, yet. Key to unlock the steering and the radio off is all I do.
Apr-01-2016 07:21 AM
Apr-01-2016 07:14 AM
Apr-01-2016 07:09 AM
mfox20 wrote:
Roadmaster 76511 FuseMaster Harness. About $64.00 on Amazon Prime. I also have the Ready Brute Elite setup.
Apr-01-2016 07:08 AM
Sam Spade wrote:Effy wrote:
We have a 2011 CRV that we tow and have never had an issue before.
With a 5-6 year old battery, PLEASE don't waste your time with other stuff until you get the battery tested or replaced.
Listen to what you said "have never had an issue before" and don't ignore the evidence.
Apr-01-2016 06:53 AM
Effy wrote:
We have a 2011 CRV that we tow and have never had an issue before.
Apr-01-2016 06:46 AM
Apr-01-2016 06:29 AM
mfox20 wrote:
Even though you don't have Nav you still have power on to the display screen when the key is in the position to tow. On my 2013 I installed the roadmaster disconnect switch that just kills the power for the display screen. Doesn't affect the radio settings. I have not had any issues towing all day with this setup. Very simple to install yourself. I mounted my switch in one of the blank plates on the lower left side of the dash. PM me if you need more info or help with the install.