cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

heater core for engine in 1985 southwind

melindakel
Explorer
Explorer
I have a 1985 southwind eagle- the heater core in the engine is leaking- chevy says the heater reil did not come from them but from the rv maker( Fleetwood)- does anyone know where I can find a replacement heater core
6 REPLIES 6

melindakel
Explorer
Explorer
thanks for the help

Argosy24
Explorer
Explorer
You're going to spend a ton of time trying to find out what company made the HVAC in a motor home that is nearly 30 years old to find it's out of business or hasn't made that core in 20 years.

Take it to a radiator shop and they will repair it or recore it.

darsben
Explorer II
Explorer II
melindakel wrote:
I have a 1985 southwind eagle- the heater core in the engine is leaking- chevy says the heater reil did not come from them but from the rv maker( Fleetwood)- does anyone know where I can find a replacement heater core


Have you called Fleetwood?
I have a 1989 Southwind and they have been very helpful.
Traveling with my best friend my wife!

fcooper
Explorer
Explorer
My heater core is currently bypassed due to leak, and I've been collecting possible sources for a replacement. Here's what I've collected so far:

www.ACMEAIPARTS.com....linkthe poster that gave me this link stated that the heater core he purchased from this source was much better quality than what he removed. (edited 10/21/13 to corrct link...fred)

"Check Mill Supply at STEPVANPART.com These people sell lots of parts for step vans, and have pictures of many different heater cores. "

Hopefully, you'll get other posts, and I'll be watching for more places to shop.

Fred
Fred & Vicki
St. Augustine, Florida

wolfe10
Explorer
Explorer
Heater core in the dash HVAC system?

Not familiar with a heat core in the engine unless you are talking about an oil cooler.
Brett Wolfe
Ex: 2003 Alpine 38'FDDS
Ex: 1997 Safari 35'
Ex: 1993 Foretravel U240

Diesel RV Club:http://www.dieselrvclub.org/

rgatijnet1
Explorer III
Explorer III
A replacement would not be any trouble at all ONCE you have the old one pulled out. Any radiator shop should be able to fabricate one or order a generic core for you.