Jan-30-2016 03:51 PM
Feb-06-2016 05:56 AM
Feb-06-2016 05:03 AM
rgatijnet1 wrote:Brodie1234 wrote:
OK folks, here's the outcome of my problem - passing along for others to know what NOT to do;
>> No A/C coming OUT of my Inverter -- Power in, Nothing coming OUT"
Lesson Learned -- Be careful running Portable Heater"S" in your unit - I understand it is a common error made by many!
THANKS to ALL that helped me with this
FYI - For now, Bypassed Inverter totally and MY A/C is working great ... Once I'm ready to spend 800-1200 I'll have another Inverter installed.
Running a heater should not harm your inverter at all. I suspect that there is a circuit breaker on your inverter itself that just needs to be reset.
Feb-06-2016 03:21 AM
Brodie1234 wrote:
OK folks, here's the outcome of my problem - passing along for others to know what NOT to do;
>> No A/C coming OUT of my Inverter -- Power in, Nothing coming OUT"
Lesson Learned -- Be careful running Portable Heater"S" in your unit - I understand it is a common error made by many!
THANKS to ALL that helped me with this
FYI - For now, Bypassed Inverter totally and MY A/C is working great ... Once I'm ready to spend 800-1200 I'll have another Inverter installed.
Feb-06-2016 03:16 AM
Feb-02-2016 09:17 AM
wolfe10 wrote:
There may be some confusion setting in here.
1. Are ONLY those circuits fed through the inverter/charger not working, or are other things like roof A/C not working. If only inverter/charger fed circuits not working, indeed look at the on-inverter breakers. But, if A/C's not working as well (i.e. whole 120 VAC system down) then the ATS OUT and breaker box IN connections are a good place to start.
An, the "salesman switch" is 12 VDC. Unrelated to the 120 VAC system, unless the thermostats for the roof A/C are 12 VDC, etc.
Jan-31-2016 03:40 PM
Jan-31-2016 10:00 AM
Jan-31-2016 09:49 AM
Brodie1234 wrote:
OK folks...I have a 40ft Desiel Motorhome (Alpine Coach)
Unit sat for two weeks -- came back -- started unit, fine.
All Electrical items on Coach fine - everything worked like a charm.
Started generator to exercise it -- power transferred over fine and Gen ran everything fine for the hour exercise.
THEN, today, two (2) days later in the PM I lost Power --- I do have a Surge Protector at the pole. Green light on -- reset breaker at pole. Protector cycled fine -- still no power inside.
Also checked and reset all breakers inside -- all fine!
Started Generator -- could hear the trasferswitch kick BUT no power produced.
Remember, two days prior -- everything worked perfectly
What has happened here -- could my 50amp breaker be bad
Advice needed
Thanks
Jan-31-2016 09:17 AM
Jan-31-2016 04:38 AM
Jan-31-2016 01:20 AM
dons2346 wrote:
Check the breakers on your inverter and also check your GFIs. Flip the breakers off and then reset. On the GFI, push the test button and then the reset. It has to have power to reset.
Jan-30-2016 07:15 PM
Jan-30-2016 07:01 PM
Jan-30-2016 06:43 PM
AllegroD wrote:
Have you checked main CB in the (inside) electric panel? Also, if you have an inverter/charger, the CB on it flips and the pass through stops.