rear camera delay

[T_bone1]

on my rv I have the three camera monitor system...When I use a turn signal and it cancels it takes about 15 seconds for the view to return to the rear camera..i have checked the menu and diddled with the signal delay but made no positive headway..The brand is rvs systems.

[T_bone1]

Go to menu .select trigger delay.3-4 seconds

[KansasRV]

How did you adjust the delay?

[T_bone1]

I adjusted delay.much better

[bullydogs1]

The two motorhomes I have owned including this one delay about 5 seconds...I pass, wait until the toad clears, then put right signal back on to get back in...

[T_bone1]

Main inconvenience is when passing..I use rear view to see when I am past the passed vehicle..

[K_Charles]

T bone wrote:
I have been on the website and the manual does not address this problem.

some might think there is no problem to address.
Ours is the same way

[T_bone1]

I have been on the website and the manual does not address this problem.

[LadyRVer]

The camera on my former motor home did the same thing. A friend said theirs was the same way.

Sorry, double post. Edited by Barb.

[LadyRVer]

The camera on my former motor home did the same thing. A friend said theirs was the same way.

[rgatijnet1]

Try this website to find your manual and see what it says about the delay. RVS camera systems

My Voyager system has a menu setting to adjust the delay time. Don't know about RVS system so you need to check what the manual says.