Help! I am a new owner of a Georgetown 377, and one thing I can't seem to figure out is how to recline the chair. Dealer told me it was just a swivel chair, but looking at it tonight it is a recliner, I just can't figure it out.
USN Retired - ETC(SS/SW) - AFT VARIETY
Currently working at Norfolk Naval Shipyard 2017 Georgetown 377, 37' 2003 Jeep Wrangler
On some "Euro Chairs" it will be on the underside of an arm rest.. All I can tell you.. Wife sat down so hard mine broke so when she died I tossed it and can't look or take photos.
You should have an owner's manual in the bag if you still have the bag.
Home was where I park it. but alas the. 2005 Damon Intruder 377 Alas declared a total loss after a semi "nicked" it. Still have the radios Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times
It may be bent and out of line with the reclining mechanism underneath. My grandson bought a new one that would not recline and I turned it over and found it probably had been dropped in a sideway angle and the sliding was binding. I realigned it and works fine now.
That's not simply a "push on the arms" recliner is it? There is not lever or any visible hardware, you just hold onto both arms and push forward on the arms and backward on the back of the chair. Presto!
What I post is my 2 cents and nothing more. Please don't read anything into my post that's not there. If you disagree, that's OK. Can't we all just get along?
I have tried all of the above, and just can't figure it out. The mechanism is a leggett and platt "4108" rv recliner. Trying to find specs/instructions on line, but no luck so far.
USN Retired - ETC(SS/SW) - AFT VARIETY
Currently working at Norfolk Naval Shipyard 2017 Georgetown 377, 37' 2003 Jeep Wrangler
