Shoreline RV5036

[ALAIN_]

Hi.
I'm new on this forum.
Question:
- Does someone have an idea of the electric wiring plan, I dont know where each wire is attach.....???

Many thanks for your help.

http://qnapnasx70pro.myqnapcloud.com:8080/photo/slideshow.php?album=rljlSv

[ALAIN_]

Yep.....

I found by myself.
On the reverse side of this part, you have 3 rings.Those rings turn on 3 terminals in the box. In that box, you can see the color of each cable.

On the picture, il we begin by the left:

First: White
Second: Red (near the middle)
Third: Black ( upper)
The last one we can see: Ground.

Change the rivet by screw and that's it, it work like new.

Have a good day.

[Executive45]

Alain, Welcome to the forum:

In the future;
1. Go to Advanced posting.
2. Click on the small blue icon next to the "quote" marks.
3. Follow the instructions provided.

Your post will then look like this....

ALAIN_ wrote:
Hi.
I'm new on this forum.
Question:
- Does someone have an idea of the electric wiring plan, I dont know where each wire is attach.....???

Many thanks for your help.

Clicky

Follow Doug's advice above....Dennis

[ALAIN_]

Hi Doug.

Many thanks for your reply.
I will try .

Have a good day.

Alain

[dougrainer]

I KNOW that part (electric 50 amp cord reel internal connections), but cannot tell you where the Black/Red/White connects too. When I get that part in the shop, the ONLY logical thing to do is replace the Cord Reel assbly. But, if you insist on repairing. You can connect the White/Red/Black to any of the open ring terminals. ALL you have to do when connecting the 50 amp cord is to verify that the White/Black/Red/green(ground) is to the correct pins on the 50 amp end. Red and Black are interchangeable. Doug

[ALAIN_]

Hi SeaDog/BRR.

Take a look to the link. If you know this part, you probably can help.
This photo explain the problem.

Thanks, have a good day.

[SeaDog_BRR]

When you post give the reader enough information (background) that they might be able to help you out. Your msg is very vague;