โDec-10-2009 06:16 PM
โMar-08-2012 02:31 PM
john b wrote:Thanks for the info buddy, I will check into the bed frame deal, I will be adding two straps to hold the tank into place but I would like the frame to stay in place also, I might have to change to a good angle iron.
Just a thought to share on the trim subject.Have you thought about talking to a continuous gutter maker for aluminum or getting some long lengths of vinyl gutter.In both cases you can cut off one side to make it into a 6 in alum or pvc 90 deg angle that way.Also a siding supplier may have some configuration already around,6in might be a good size.
Also trucker just ib passing when we were a pup bedrail was very available for projects but we soon learned that it was high carbon & not real reliable for anything structural as weldng and it did not agree with one another real well,bolting or riveting was OK. But nowadays it might be a bunch different. JUST IN PASSING. keep up the great work as I sure enjoy your project. Back in the late 60s my son & some friends built first a 23 ft class C from the ground up & then a few years later converted it into a 24 ft class A and in total we enjoyed it for 16 years & many miles. Keep on trucking as I know the fun you are having albeit work too! jmho jb
โMar-08-2012 08:52 AM
โMar-08-2012 05:59 AM
โMar-08-2012 05:02 AM
โMar-07-2012 07:39 PM
oldtrucker63 wrote:
As you can see the photo above,..of the Toilet showing water in the bowl, It's not really that great looking, Is there any kind of paint that we could paint this with, Has anyone ever painted there old toilet trying to get it to look a little better.???:h We are thinking about the paint that Wal-Mart has for the outdoor plastic lawn chairs. Leave the white part and paint the ugly beige.
โMar-07-2012 07:21 PM
oldtrucker63 wrote:rehoppe wrote:I believe this one is the factory toilet from 1979, Ya think we could find a replacement seat and lid, That would be great.
Tony
You probably can get a new seat and lid to just bolt on, I'd hope. Never saw one painted before. Well not a plastic one anyway. I Dunno maybe some high gloss enamel?
โMar-07-2012 06:05 PM
rehoppe wrote:I believe this one is the factory toilet from 1979, Ya think we could find a replacement seat and lid, That would be great.
Tony
You probably can get a new seat and lid to just bolt on, I'd hope. Never saw one painted before. Well not a plastic one anyway. I Dunno maybe some high gloss enamel?
โMar-07-2012 06:02 PM
mrfixit454 wrote:Hey Thanks,...I believe this is what Wal-Mart has, I think we will try to re-finish the toilet and make it look a bit better.
Krylon makes a plastic paint.
Check it out
โMar-07-2012 04:58 PM
โMar-07-2012 04:46 PM
โMar-07-2012 04:43 PM
โMar-07-2012 04:34 PM
โMar-07-2012 04:29 PM
Capt.Storm wrote:Yeah Captain I rest way to much, It has been two years now, Although I do believe I will finish it completely sometimes this Summer.:B....It's been fun.....Thanks buddy.
Man,
You are one dedicated guy..do you ever rest?
Talking about making something your own!
I'm impressed to say the least!
โMar-07-2012 03:59 PM
โMar-07-2012 12:46 PM