What did you do to your Class C MH today???

[Rich_Panganiban]

This is always a fun thread to watch in other forums, so I thought I'd start one here.

[Navy_Smoker]

Loaded it for a short trip with two of our grandsons. Leaving tomorrow after an early dentist appointment.

[hotbyte]

Yesterday we flushed/changed brake fluid...
Today I removed all of the old caulk around shower sky light and re-caulked.

Two yucky, messy jobs!!!

[hotbyte]

tenbear wrote:
Finally finished converting the under dinette seat storage area to a drawer. Only took me 3 days, mostly waiting for glue to dry and find the tool that I had previously put down somewhere. :h

Nice job...I usually find I'm sitting/layinh on the tool, it is in my back pocket or behind my ear 🙂 🙂 🙂

[Cousin_Eddie93]

Began more delam repair today



Removed the lower section of filon and the rotted plies of luan and partial board. Letting it dry over night, still damp in there.



Tomorrow, weather permitting, I'll add new wood bonding it with screws and epoxy resin, let it cure for a few hours then bond the filon; again, with epoxy resin and clap it down.

[Navy_Smoker]

Had window awnings installed at Camping World. Only one problem, Dometic shipped and empty tube (no awning inside)to Camping World and I will have to go back next week to have the last awning mounted. The people at Camping World are going the extra mile to compensate me for my inconvenience.

[Alta_Volunteer]

Let it sit all day after just getting back from a month on the road in Oregon, Washington, on Vancouver Island, throughout BC and Alberta, in Idaho, Montanna, Eastern Washington, Nevada and back to Calif.

Next up: rewire or replace the battery charger, fix the power step, more cabinet and drawer
repairs, more battery tray improvements, imstall rear air bags, and an oil change, as well as a pretty thorough cleaning.

[tenbear]

Finally finished converting the under dinette seat storage area to a drawer. Only took me 3 days, mostly waiting for glue to dry and find the tool that I had previously put down somewhere. :h

If interested, here is a link

[woodworker414]

BUMMMMMMMER fireman93514, been there done that. we were in Fish Bay, WI. Had a truck camper at that time. The DW was driving. It was my job to check for low hanging branches, buuuuuut. We were at the curb in town and getting ready to leave to ead home. The DW want to make one more stop at the store to get trinkets for the grandkids. As she was pulling away from the curb I was sight seeing and paid the price. A foot long gash in the upper right hand corner of the rig. The magic of duct tape solved the problem, till we could get home and the son in law could fix for us.
Safe Travels

[fireman93514]

Filed an insurance claim for the low hanging branch that ripped my awning and poked a hole in the side of my rig.

[Cousin_Eddie93]

RoadAbode wrote:
Replaced some rotted wood in the quarter panels and fixed the panels behind the bumper.

Then went out for a Guys Weekend down Aberdeen MD to Bar Harbor RV Park - Right on the water!

Here's mine


Reverse pull lots or torsion, Delam fix came out great. Only do one section at a time

[woodworker414]

http://tinypic.com/r/swbzpt/8
This is never a good sign. The alternator failed. Oh, well, just another day on the road. This happen a whild back.
Safe Travels


HHHHHHMMMMMMM, wonder where the image went?
As you can tell, I don't do this very often. So I have to relaearn how to do this.

[woodworker414]

Went to Lake of the Ozarks to visit sister and her husband. My sister and I stayed at the Osage Beach Rv Park, in Osage Beach, MO. On Sat. afternoon we came by the C to pick up some stuff to take to my sisters place. Open the door and the a/c was off, in fact no power. The main breaker had tripped. HHHHHHHMMMMMMMMM. When I open the panel door it was very warm. Reset the breaker and all was well.Well Sun. afternoon we all were at the C, in the afternoon and the breaker tripped again. HHHHHMMMMMMM. Again the panel door was really worm, maybe even hot.The breaker was hot. Back home got into it and the son in law, he is my eyes, found that two of the prongs on the shore power cord were very loose.to the point for one of them, you could just about pull it out.
So a new shore power cord was installed. Decided to replace the breaker also, since the breaker heated up numerous times. For less than 20 bucks a new breaker. All is well now.:)

[woodworker414]

Yep MIke, been there done that. I had a Real Lite 12' truck camper. Boutght new to me, knowing I had a job coming with it. I had to replace the wall under the main large side window. Replaced all the structure and the paneling inside. When done look good as new. Being a carpenter sure help in tackling the project. I would do it again if needed.
Safe Travels

[RoadAbode]

Replaced some rotted wood in the quarter panels and fixed the panels behind the bumper.

Then went out for a Guys Weekend down Aberdeen MD to Bar Harbor RV Park - Right on the water!

[ericsmith32]

Cleaned out the black and grey tanks today. Yeah it smelled horrendous! But as I told my wife the neighbors were out smoking and I had to smell that they could smell the sewer. Had 5 gallons in it per the bucket I put under it. Put the hose down in the tank and moved it around. Little chunks came out but for the most part the black tank was clean. The grey tank alot of stuff came out.. put the hose each drain and blew it out. Washed the bugs off before and put the tire covers back on for a 2 week nap then our last week trip till December.