What did you do to your Class C MH today???

[Rich_Panganiban]

This is always a fun thread to watch in other forums, so I thought I'd start one here.

[Navy_Smoker]

We washed it top to bottom, (I forgot the roof was white!) and waxed it. On Friday I shampooed the carpet and replaced the pneumatic lift rods on the bed. We're almost ready for our dive trip to the Keys.

[Cousin_Eddie93]

And Walla, eureka, I have new power!

[Cousin_Eddie93]

Ripped out all that old crud; DC circuit board and lower unit. Installed the new and wired up. It was quite easy actually. Anybody can do this.

[Cousin_Eddie93]

Borrowed some of that white 12 gauge to replace the cooked wire fused to the old block. Cut back the old and soldered in the good wire. Wire nuts and crimps can be sketchy, so I avoid when ever possible.

[Cousin_Eddie93]

Upper left see the shiny new neutral block. The old one was cooked pretty good, had to replace.

[Cousin_Eddie93]

[Cousin_Eddie93]

I'm sure the amount of work I've been putting in to Cousin Eddie lately is probably making some tired just reading about it. Well, I did it again. Today was power converter upgrade day. Our friends at Best Converters hooked me up with one of their Magnitek to PD conversion kits. No more pre charging the bats before a boondocking. This puppy charges em up in three hours flat.

Removal of exterior panels exposing that ratty old upper and lower converter.

[Cousin_Eddie93]

woodworker414 wrote:
Forgot to say, it looks good.
Safe Travels
Bill

Hello and thanks, it was getting a little pitted underneath so I figured I better seal up the rust spots before something bad happens.

The gasket your referring to is a 1" diameter or so O ring, round or it may be contoured to your valve. You can pick those up any propane or even wielding supplier. The old one must have come out with the nossel at your last CG.

[woodworker414]

Forgot to say, it looks good.
Safe Travels
Bill

[woodworker414]

Looking at the propane tank, made me think. I was on a trip down to the gulf coast, needed propane, filled up at the cg.Well only half filled.For some reason I thought I may have had a leak in the system Nope. Went to have if filled locally here. and the guy said that he could nto fill it because the gasket that is at the back of the port where the propand nozzle is plugged into, is missing.
Is there a special name for that gasket?
Safe Travels
Bill

[Cousin_Eddie93]

[Cousin_Eddie93]

Gave the old propane tank a few coatings of rustoleum.

[Gunner45]

Today dh waxed the kitchen and bathroom floors. The only thing I did was make the menu for our next trip.

[noe-place]

Just got back from summer trips to New York and Maryland. DW spent couple of days cleaning the inside and I took care of the outside like always. Happily we have a garage to keep our MH in during the off season so I no longer have to winterize and that advantage keeps it looking like new even though it'll be ten years old this December.

[Cousin_Eddie93]

Gunner45 wrote:
We LOVE our folding wagon. My friends used it a couple of times while we were dry camping to run to Safeway to get ice.

I'm working today but it's dh's day off. So he did a little puttering in the RV today. He made the bed, cleaned the carpets and was thinking about washing the outside 🙂

I just got back from my girls weekend on Monday and then we take it out again the last weekend in August.

My son loves the wagon too, he actually slept in it one night.