โOct-30-2017 03:48 PM
โNov-20-2017 09:11 AM
โNov-19-2017 06:05 PM
โNov-19-2017 05:59 PM
โNov-03-2017 11:17 AM
โNov-03-2017 11:12 AM
โNov-01-2017 07:20 PM
wildmanbaker wrote:
OK, do you have to add salt to these tanks to regen them? Since you have 2 tanks, could it be that they are Cation and Antion tanks that need to be exchanged for fresh ones? When you said you had 2 tanks, I assumed one was resin bed and the other was for salt (brine) for regenning.
โNov-01-2017 07:09 PM
โOct-31-2017 03:07 PM
โOct-31-2017 11:13 AM
โOct-31-2017 06:34 AM
wildmanbaker wrote:
If at all possible, I would remove the softener and bring it inside where it will not freeze, and the brine tank also, as it will have water in it also. I'm not real sure I would introduce RV antifreeze into the softener, as I'm not sure what it would do to the media. Yes the attaching hoses need to be drained also. For the filter, just remove the can and remove the filter, and loosely reinstall the can. Be sure not to loose the O-ring for the filter can. If you have an air source, blow down the water system using the city water hook-up. Limit air pressure to 50 psi and open each valve inside and out, then the drains. Don't forget the hot water heater, and any water lines going to the refrigerator. Also the shower hose.
โOct-30-2017 06:21 PM