โJul-11-2013 04:56 PM
โJul-12-2013 10:43 AM
Bill.Winegard wrote:I did write down all the times and messages. Where can I send them to you. I did call tech support but like usual no one answers and when they return the call 8 hrs. later I was not home. I emailed them and all they said was that's normal. I know something changed and would like to find it before the warranty runs out. Thanx
If you are still seeing numbers of 90+ on the 101, 110 and 119 satellites then it's a puzzle to me. Nothing that I am aware of has changed and I have not heard of similar issues. It's possible that something could be going wrong with your electronics but I have not seen a similar example. If you want to take the time, the next time you move watch watch the display on the Trav'ler controller and write down what it shows during the search. Write down each message each time it changes and then drop me an e-mail so we can see if there are any clues there.
You can also call Winegard Tech support at 800-788-4417.
โJul-12-2013 08:55 AM
โJul-12-2013 08:17 AM
Bill.Winegard wrote:Absolutely no changes. Came back from Fla.(late April) where it worked fine. Tried to setup in the middle of a field in Central Pa.(late June). Took well over 20 minutes before I parked it and tried again. It seemed to take forever even the second time but I did not time it. I tried it when I got home and it is taking between 13-15 minutes. This is far longer than before. It used to setup so quickly it was never even thought about. Now it is close to double (just guessing).az99 wrote:Bill.Winegard wrote:That is what mine used to take. All of a sudden it is taking 15+. Any suggestions.
6-8 minutes. I have seen 10 minutes a couple of times but 6-8 would be a good average. The SK-SWM3 can take a bit longer in some parts of the Country due to some spot-beam issues.
Have you changed any receiver hardware or added the SWM hardware? Any partial blockage of any of the 5 satellites it needs to locate (99, 101, 103, 110, 119)? Just this location or many? What part of the Country?
โJul-12-2013 06:54 AM
az99 wrote:Bill.Winegard wrote:That is what mine used to take. All of a sudden it is taking 15+. Any suggestions.
6-8 minutes. I have seen 10 minutes a couple of times but 6-8 would be a good average. The SK-SWM3 can take a bit longer in some parts of the Country due to some spot-beam issues.
โJul-12-2013 04:50 AM
az99 wrote:
That is what mine used to take. All of a sudden it is taking 15+. Any suggestions.
โJul-12-2013 04:16 AM
Bill.Winegard wrote:That is what mine used to take. All of a sudden it is taking 15+. Any suggestions.
6-8 minutes. I have seen 10 minutes a couple of times but 6-8 would be a good average. The SK-SWM3 can take a bit longer in some parts of the Country due to some spot-beam issues.
โJul-11-2013 05:06 PM
โJul-11-2013 05:00 PM