Missing propane cover

[RT170P]

Aloha all:

I have a 2007 Roadtrek 170, and recently, some unscrupulous ...person...decided they needed the propane cover (rear bumper) from my Roadtrek more than I. 😞

Anyhow, I've been looking at trying to replace it, but have been having a tough time finding one, so I think I'll just try to fabricate one instead. That said, my Roadtrek is far away and I don't have the measurements for the cover, so I'm wondering if someone on here could provide me with the dimensions of the cover (height/width), and the depth/size of the cut outs for the wing/fasteners? Even a couple pics with a tape measure on it would be awesome.

Thanks in advance.

Mike

[opnspaces]

4 1/2 inches from the bumper straight up or the height, But there is a curve at the bottom going from vertical to horizontal that you would have to figure out. The width is about 11 1/2 inches. Or you could probably measure between the two bolts that are sticking out. Maybe these links will help.

Link
Link

[elvis33]

I cannot see the image baskbetbros
so what is the right dimensions of the cover? I also need it for my situation so if anyone knows, please tell me. Thanks.

[RT170P]

That's awesome pasusan...thank you so much!

Mike

[pasusan]

Here ya go...











Hope it helps...

[Lwiddis]

Many various sizes are sold by CW, Amazon, eTrailer and others. If you’d rather make your own, it could be superior.