โAug-08-2020 07:16 PM
โOct-13-2020 11:47 PM
Old timer Dave wrote:
I have a 1978 dodge MB300, If you want I will take pictures and see if we have a match. I believe mine has instructions on it so will have a peek today.
โOct-13-2020 11:46 PM
Old timer Dave wrote:
I have a 1978 dodge MB300, If you want I will take pictures and see if we have a match. I believe mine has instructions on it so will have a peek today.
โOct-13-2020 11:42 PM
dougrainer wrote:
http://techsupport.pdxrvwholesale.com/wp-content/uploads/2017/09/Suburban-Dyna-Trail-Installation-Op...
You are going to have to PULL the furnace. There is no other way to troubleshoot. Odds are after 40 years the cast iron burner in clogged with rust. To clean the burner you have to pull it and use a standard Hack Saw blade to clean out the slits in the burner casing and then blow it out. Remove the orifice also and clean it out. Doug
โAug-11-2020 12:38 PM
โAug-10-2020 08:00 AM
โAug-10-2020 07:52 AM
โAug-10-2020 07:03 AM
โAug-09-2020 02:46 PM
โAug-09-2020 09:35 AM
โAug-09-2020 08:04 AM
โAug-09-2020 07:05 AM