โJun-01-2017 03:56 PM
โJun-07-2017 07:16 AM
โJun-06-2017 10:40 PM
pianotuna wrote:
Make sure you do a cool down before switching to shore power. I hope there is good ventilation for the inverter.
Are you saying the fans run constantly?
โJun-06-2017 08:23 PM
โJun-06-2017 05:17 PM
โJun-06-2017 04:21 PM
โJun-05-2017 06:37 PM
โJun-05-2017 05:11 PM
โJun-05-2017 01:08 PM
โJun-05-2017 12:39 PM
โJun-04-2017 02:12 PM
time2roll wrote:
I agree with no switch. Really needs a lockout device to comply with NEC.
Also wire nuts I listed above would technically need to be in a J-box.
โJun-04-2017 02:07 PM
โJun-04-2017 12:12 PM
โJun-04-2017 12:00 PM
โJun-04-2017 11:44 AM
pianotuna wrote:Depends on the breaker rating. This is after the panel so probably 15 or 20 amp protected.
Hi,
You need a 30 amp switch or better. It is far cheaper to get male and female plugs and idiot proof.lafester wrote:
Just read a post on another forum describing a 20 amp dpdt switch install to bypass the inverter.