Leveling Jacks won't deploy

[timberlake]

I have a 2005 Itasca Suncruiser 35 the slide outs function fine but after I returned from my last trip I parked it next to the house and went to level it but when I pushed the buttons the motor sounded normal but they did not drop- again the slideouts are working fine- any info would be appreciated. thanks Bill

[Monaramblee]

Hold battery boost button on while deploying the jacks and see if that helps.

[enblethen]

Does any lights come on the controller?

[wanderingaimles]

timberlake wrote:

wanderingaimlessly wrote:
Check to ensure the switch for the parking brake is showing the brake is on.
If the light isnt on, jacks wont work.
next would be fluid level.

Yes the parking brake is on and I was thinking if the slide outs function properly would fluid be an issue? thanks

Engine on? If not, try it with the engine running.

[enblethen]

What chassis is your rig on?
325 is a joy stick type leveler control(error: 225 systems are joy stick)
625 is push button
Send me your link via private message.

[Bobbo]

New members can't post links. I forget how many posts you need before it is allowed. It keeps the forum from being spammed.

[timberlake]

enblethen wrote:
Good chance you have a***Link Removed***.
Look on list for your chassis and exact model number.

HWH 325 SYSTEM

[timberlake]

***Link Removed***

enblethen wrote:
Can you describe your control panel on the dash? What type of operator do you have, push button or lever?

[enblethen]

Good chance you have aHWH systems.
Look on list for your chassis and exact model number.

[enblethen]

Can you describe your control panel on the dash? What type of operator do you have, push button or lever?

[timberlake]

wanderingaimlessly wrote:
Check to ensure the switch for the parking brake is showing the brake is on.
If the light isnt on, jacks wont work.
next would be fluid level.

Yes the parking brake is on and I was thinking if the slide outs function properly would fluid be an issue? thanks

[timberlake]

enblethen wrote:
Have you checked to insure control unit has power? Sounds like no power to operate solenoids.
Make and model of jacks.

Not sure what control panel you are referring to the one on the dash? That has power if not that which one? I don't have a manual for it so I don't know the make and model I'll have to figure out by searching I guess...thank you

[wanderingaimles]

Check to ensure the switch for the parking brake is showing the brake is on.
If the light isnt on, jacks wont work.
next would be fluid level.

[enblethen]

Have you checked to insure control unit has power? Sounds like no power to operate solenoids.
Make and model of jacks.