Nov-13-2014 10:20 AM
Nov-16-2014 02:14 PM
Nov-16-2014 12:59 PM
Nov-16-2014 07:40 AM
pnichols wrote:coolbreeze01 wrote:
Thanks for the idea, now to find the materials.
Here's one source for sound proofing material from the marine world (there are plenty more sources):
http://www.soundrite-acoustics.com/engine-room-boat-soundproofing-vinyl-foam_2.aspx
Here's one source for better isolation mounts than what usually come with Cummins ("Onan") generators as mounted by the RV manufacturers (there are other sources):
http://www.avproductsinc.com/index.html
Nov-16-2014 06:02 AM
Nov-15-2014 09:04 PM
Nov-15-2014 05:21 PM
Nov-15-2014 03:28 PM
Nov-15-2014 04:47 AM
Nov-14-2014 07:14 PM
Nov-14-2014 06:42 PM
Nov-14-2014 06:37 PM
Nov-14-2014 05:46 PM
64thunderbolt wrote:
previous 5er had a solid compartment door with the floor open for air.
Nov-14-2014 04:53 PM
Nov-14-2014 03:58 PM
Wayne Dohnal wrote:
Mine broke both valve springs at about 20 hours. There were hundreds, perhaps thousands of KY series generators that suffered the same fate at various Hobbs readings. I was lucky that my damage was limited to the springs. A lot of them sucked a valve and required total replacement.