I have a 2007 Okanagan 116 ult. the slide out got stuck out and would only move back and forth about 3 inches. I had a repair tech work on it for 3 hours before he gave up. he determined something was binding in the slide mechanism its self but didn't have any idea how to get to it with our removing the entire slide. I decided to dig into it myself and i was able to get the slide mechanism out buy unbotting it and lifting that side of the slide out about 1-2 in. Log story short the problem ended up being the set pin in the coupler that attaches to the motor had worked its way out and was hitting the bracket and stopping . was able to just tap it back in and glue it in place and get back on the road. hope this might help someone else save time and money.
