I added surface mounted flat wafer type LEd lights in the outside lights on another camper and they worked great but they had been treated with conformal spray to protect them in high moisture conditions. I now need to add lights on another camper and have purchased the round type with LEDs mouted around the cylinder shaped mount. The conformal spray I have will not reach inside the lights to treat the circuit board. The light fixtures I am putting them in is a high moisture environment inside during rain or when washing the RV. I am wondering if anyone has used this type of light in an outside fixture without treating with conformal spray and what was the outcome or maybe someone figured out a way to treat them safely? This is the model I got. Note the light output is 480 lumen. Thanks in advance for any help or information you can pass on.
http://www.amazon.com/gp/product/B00EYTPSCS?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Jerry 35J Bounder Diesel motorhome
2005 Lance 1181 Max with all options
2003 Dodge Laramie 3500 CTD HO DRW, Air bags, SprSprngs, Rancho R9000X, XM Radio, Garmin GPS, Hellwig sway bar, Centramatics
..RVing since 1966