cancel
Showing results for 
Search instead for 
Did you mean: 

Splendide Washer dryer hoses

reppoc12
Explorer
Explorer
We purchased a used Splendide 2100 washer / dryer combo, but it did not have the water supply hoses with it. Both the hot and cold connectors have 90 degree fittings on the back of the washer that are much smaller than the standard 3/4". Does anyone know of these are standard and if so what size the connection is and where to find supply lines? Have been looking online and I think it might be part number 112930, but the prices seem very high for a supply line, $50.00 - 60.00 and I am not sure if that is the right part and if that is for one or two.
Mods please feel free to move this. I was not sure where to post this question. Thanks in advance.
7 REPLIES 7

Bill_Satellite
Explorer II
Explorer II
Mine must be older or different but I bought some stainless steel hoses as Home Depot or Lowes. Westland Sales is a great operation. Did you ask if the hoses were a special size?
What I post is my 2 cents and nothing more. Please don't read anything into my post that's not there. If you disagree, that's OK.
Can't we all just get along?

reppoc12
Explorer
Explorer
In case anyone else has this problem, I ordered from Westland Sales today 800-356-0766. $92.94 including 2 day shipping. I suspect if you know the size you can get them elsewhere but I did not have the original hoses to try and match up.

reppoc12
Explorer
Explorer
jetcare wrote:
The hoses are metric thread at the machine end. They retail for almost $40.00 each. I have been on a number of service calls with reported water leaks and found hardware store hoses. Don't do it.

Thanks Jetcare, any idea what size they are? If not I will call Splendide Monday.

jetcare
Explorer
Explorer
The hoses are metric thread at the machine end. They retail for almost $40.00 each. I have been on a number of service calls with reported water leaks and found hardware store hoses. Don't do it.
2016 F-250 Crewcab 6.2L 4x4
2012 Palomino Sabre 32' Travel Trailer

reppoc12
Explorer
Explorer
Thanks for the information guys. I will check it tomorrow and hopefully the PO just added the 90 deg fittings onto standard 3/4 " fittings. Although I have no idea why.

Bill_Satellite
Explorer II
Explorer II
Mine are standard hoses as well.
What I post is my 2 cents and nothing more. Please don't read anything into my post that's not there. If you disagree, that's OK.
Can't we all just get along?

donn0128
Explorer II
Explorer II
Mine has standard washer hoses found at Lowes or HD.