โFeb-21-2019 01:53 PM
โFeb-22-2019 11:56 AM
โFeb-22-2019 08:34 AM
MarkTwain wrote:oil8390 wrote:
a question regarding the holding tanks.
I have a 25 gallon black tank, how much water should i add to it before i use it for the first time in our new trailer and whats the easiest way to do that?
3 to 4 gallons. Empty your black only when it is almost full.
When you see/hear a gurgling and a bubbling sound, it is time to empty. If you have a back flush connection on the side, hook it up before you start emptying your black tank and leave it run until the tank is empty. Then close the black valve and let the black tank fill about 1/2 way, then open the black tank valve until the tank is empty again, this will wash down the inside of the tank. Close the valve and put in about 3 gal. of water. Job done
โFeb-22-2019 08:17 AM
โFeb-22-2019 03:09 AM
โFeb-21-2019 06:35 PM
Old-Biscuit wrote:
Fill toilet bowl full and flush
do it twice
Idea is too keep bottom of tank WET that way stuff doesn't stick and dry out
โFeb-21-2019 05:42 PM
โFeb-21-2019 04:36 PM
oil8390 wrote:
I have a 25 gallon black tank, how much water should i add to it before i use it for the first time in our new trailer and whats the easiest way to do that?
โFeb-21-2019 04:25 PM
โFeb-21-2019 04:20 PM
oil8390 wrote:
a question regarding the holding tanks.
I have a 25 gallon black tank, how much water should i add to it before i use it for the first time in our new trailer and whats the easiest way to do that?
โFeb-21-2019 03:11 PM
Old-Biscuit wrote:
Fill toilet bowl full and flush
do it twice
Idea is too keep bottom of tank WET that way stuff doesn't stick and dry out
โFeb-21-2019 02:10 PM