Keystone Bullet Premier

[CampinEarls]

We are seriously looking at buying a 31BHPR. It pretty much has everything we are looking for in a TT, the only cons we can think of with it is, it has curtains instead of solid doors for the bedroom and bunkhouse....that's about it.

Maybe because this one is so new, But i'm having a hard time finding any reviews or testimonials about them.

This is our first TT, i've rented a couple times and that makes us realize we want our own, we've been researching for months and have narrowed it down to this one.

Is there anyone out there that has any experience with the Bullet line that can give me their opinions?

Thanks!

[Andy_F]

pyro383 wrote:
I called Keystone for mine and offered to pay for it, they refused to charge me and sent out all the decals I needed and paid for the shipping.

Thanks! That is good news. I will contact them next month after we return home from our big Florida trip.

[pyro383]

I called Keystone for mine and offered to pay for it, they refused to charge me and sent out all the decals I needed and paid for the shipping.

[Andy_F]

RainbowsEnd wrote:

gregrc75 wrote:

This website carries a ton of Keystone replacement parts. Just enter the year, make (Bullet, not Premier) and search category. You can also try your dealer.

Trekwood

So far the only decal showing some age on my trailer is the front one that says "Premier." But, it faces due south everyday in my driveway. Also, I have fewer decals since I have the paint.

Just what I'm looking for! I've no dealer around here unfortunately. I knew someone here could help. This group continues to be the best!!!

My "Bullet" decal is cracking and fading on the front of our '12 Bullet. All the other decals including the stripes on the front look great and like new. I wash my TT monthly with 303 treatment afterwards. I've also stored it indoors each winter for 5-6 months out of the year. My entire TT looks shiny and new except for this particular decal.

Seems like there is a quality/defect issue with this decal. Has anyone tried getting Keystone to replace it?

[RavensFan24]

In my 30RIPR I just ran a line over to the AC control unit. No drilling, no holes, no removing anything. Just fish the line from the vent opening to the AC control unit and tie in with the 12v constant that's in use with the thermostat.

Works like a charm!

[Hiswar]

Hiswar wrote:

gregrc75 wrote:

Hiswar wrote:
Help please...wanting to install a powered vent (MaxxAir or Fantastic Fan) in the kitchen/living area vent. There are no visible 12v powered electrical lines visible. Has anyone installed a powered vent here? Looking for the best option to find power to this vent to do this mod. Any direction/help would be greatly appreciated.

I did this. I removed the vent and ran the wiring through the ceiling to above the microwave. I removed the microwave and made a small hole in the ceiling to fish the wires through. (You will not see the hole once you replace the microwave). Then I tied into the stove vent hood for power.

Nice! That just might be the ticket...Just need to check location of vent compared to microwave and/or refrig...I think my model (Premier 31BHPR) has the vent in line with the refridge.

[Hiswar]

gregrc75 wrote:

Hiswar wrote:
Help please...wanting to install a powered vent (MaxxAir or Fantastic Fan) in the kitchen/living area vent. There are no visible 12v powered electrical lines visible. Has anyone installed a powered vent here? Looking for the best option to find power to this vent to do this mod. Any direction/help would be greatly appreciated.

I did this. I removed the vent and ran the wiring through the ceiling to above the microwave. I removed the microwave and made a small hole in the ceiling to fish the wires through. (You will not see the hole once you replace the microwave). Then I tied into the stove vent hood for power.

Nice! That just might be the ticket...Just need to check location of vent compared to microwave and/or refrig...I think my model (Premier 31BHPR) has the vent in line with the refridge.

[gregrc75]

Hiswar wrote:
Help please...wanting to install a powered vent (MaxxAir or Fantastic Fan) in the kitchen/living area vent. There are no visible 12v powered electrical lines visible. Has anyone installed a powered vent here? Looking for the best option to find power to this vent to do this mod. Any direction/help would be greatly appreciated.

I did this. I removed the vent and ran the wiring through the ceiling to above the microwave. I removed the microwave and made a small hole in the ceiling to fish the wires through. (You will not see the hole once you replace the microwave). Then I tied into the stove vent hood for power.

[Hiswar]

Help please...wanting to install a powered vent (MaxxAir or Fantastic Fan) in the kitchen/living area vent. There are no visible 12v powered electrical lines visible. Has anyone installed a powered vent here? Looking for the best option to find power to this vent to do this mod. Any direction/help would be greatly appreciated.

Forgot to mention I have a Premier 31BHPR

[Hiswar]

deltabravo wrote:

Hiswar wrote:
What would be to the 3 most beneficial mods you have done to your Premier.

Power tongue jack, if it doesn't already have one.

All Premier's come with a power jack...

[EcoBullet]

RavensFan24 wrote:

eastcoasthd wrote:

Finally got a chance to check things out in more detail.
Just as you said..... Matter of choosing the correct input on the TV. :S
All is well

Glad to hear it!

We had the same problem with ours. The dealer checked it out and couldn't get it to fail, and he showed it to me. We had the problem again later and figured there must be a loose connection.

After reading your posts, I figured I might as well check it out. Sure enough, when on component mode, a DVD will play, but in B&W. Switching to AV mode resulted in a clear color picture. THANKS FOLKS! I would have thought it would either work or not, wrong!

[RavensFan24]

eastcoasthd wrote:

Finally got a chance to check things out in more detail.
Just as you said..... Matter of choosing the correct input on the TV. :S
All is well

Glad to hear it!

[deltabravo]

Hiswar wrote:
What would be to the 3 most beneficial mods you have done to your Premier.

Power tongue jack, if it doesn't already have one.

[eastcoasthd]

RavensFan24 wrote:
Yes, that is what I meant. I feel like it was that or I chose the wrong setting on the TV to watch DVD and the first one I stopped on looked terrible like you mentioned, but then when I switched to another source option it worked well.

Sorry I don't remember specifically. I just remember being pissed off the first time I tried to watch a DVD in our brand new trailer and having it not work properly. A couple minutes of tweaking stuff and it worked fine. Was glad to not have to take it back to the dealer as I discovered the TV had a big scratch on it and already had to have them replace that item, I definitely didn't want to go back for another TV related issue.

Side note: Camping World had the replacement TV delivered to my house about an hour from their dealership by one of their guys. I signed a waiver saying I received it, handed them the old TV and was good to go. I def appreciated that service.

Finally got a chance to check things out in more detail.
Just as you said..... Matter of choosing the correct input on the TV. :S
All is well

[gregrc75]

eastcoasthd wrote:
This followed me home on 8/21.

2016 31BHPR



A couple minor issues thus far....

DVD player only plays in B&W with a slight amount of graining. Inspected wiring, nothing obvious. Probably an internal issue?

One outside speaker no workie. Pulled it, found a bad solder joint and re soldered.

Other than that we love it!

TV handled it exceptionally well. Of course, it was for the most part empty. Need to get both loaded up and CAT scaled to get exact weights.

Congrats! Very nice set up.

[eastcoasthd]

Thanks for the feedback.

I'll confirm the TV source selections as well.