โMay-09-2017 07:51 PM
โMay-11-2017 09:14 AM
DWeikert wrote:Bedlam wrote:
Why not mount a coax barrel connector on the roof surface with a cap so you have it pre-wired if you change your mind?
That's what I did when I removed the Winegard crank up OTA antenna to make room for more solar. Winegard reception was also ****, at least where I generally camp. I cut an aluminum plate to match the footprint of the Winegard and mounted a RF barrel connector for future use. I took an RF connector that you would crimp onto coax and sealed it with RTV then screwed it onto the barrel connector to prevent water entering the connector until I added the Dish Tailgater you see mounted on the ladder.
Before anyone gets excited, the wire routing you see was temporary. I had removed my Kyocera panels to make room for the AC, then had the AC installed before mounting the new Renogy panels.
โMay-11-2017 09:12 AM
Tizi wrote:
I bought one of those flat antenna and mounted inside the entertainment cabinet. 50 mile range, **** thing actually works really well.
โMay-11-2017 07:16 AM
Bedlam wrote:
Why not mount a coax barrel connector on the roof surface with a cap so you have it pre-wired if you change your mind?
โMay-11-2017 06:05 AM
โMay-10-2017 11:49 PM
โMay-10-2017 07:30 PM
โMay-10-2017 07:25 PM
โMay-10-2017 12:23 PM
covered wagon wrote:
I found that regular coat hanger inside the camper worked better than the Glomax on the roof. ..
โMay-10-2017 09:26 AM
โMay-10-2017 06:37 AM
โMay-09-2017 11:37 PM
โMay-09-2017 09:45 PM