For an Excel Limited in the 2006 year model range what was the factory dvd/cd/radio entertainment system? Make and model please. I am looking at purchasing this unit and the three items not included is the coffee table, table between the two recliner...
I have a 5th wheel and according to the Tire Pressure and temperature gauge the curb side tires run hotter than the street side. I have Goodyear g614 and filled the tires to 95 psi this morning. around 2 pm the air temp was 86. curb side front 104, c...
I have a 2006 KZ 37k toy hauler. The living room slide in half way. It appears the gear is stripped at the motor. Motor tuns but not the bars. In the owners manual it states to manually operate use a 3/8 socket on the 3/8 in rod. The end of the rod o...
My current RV is a KZ 37k. I work remote out of this when we travel and attend our local chapter monthly rallies. I constructed a desk top that folds down flush against a side wall when I do not need the office and we use the ramp as a patio deck. We...
We are planning a trip to Lake City, CO, from Central Texas. Is there a route that you like best. We have camped locally with a 37 ft 5th wheeler for a couple of years, but never made trips to the mountains. I have heard that the descent into Lake Ci...
I mentioned it was about 2 pm and I was heading north bound so the sun was not on the curb side tires at that time. Otherwise the curb side always run about 10 deg hotter. I will increase them to 110 cold psi and see what that materializes. Does anyo...
Once I found where the motor is I cut the underbelly. The shaft is scare so I used a crescent wrench to close the slide. Apparently I am missing one tool which is slotted at the end of the 3/8 shaft that has a key through it. It is not the same as th...
I was hoping it would be the pin so I dropped the under carriage cover so I could see the motor and shaft. When my wife operates the switch the shaft will not turn on either side of the motor and it sounds like the gears are stripped in the gear box....
Yes that is what I currently have. As I mentioned I build a fold down desk that is flush to the wall just looking to find one that has a slide in the office area for more room.
