O.K. diesel boys...put away your guns please...been there done that We recently downsized to a Shadow Cruiser 225 RBS and are pulling it with the old '95 Dodge 3500 CTD DRW. Time to go to quiet comfort! I am considering a Tahoe, Yukon or maybe a ...
Hi All,We are on a narrow street and have been keeping our TT, 225 RBS Shadow Cruiser, at another location. So, we are considering keeping the TT at home and a Power Caster would/could make this happen.Doing a bit of research I find 10 months of stor...
I know this is the place to get real info. We downsized to a lightweight, Shadow Cruiser 225 RBS, 4K + dry....now I would like to retire the 1995 Dodge 3500 DRW Cummins. Time for something smoother, quieter.Lots of Ford F150's out there towing. I am ...
Hi All,We recently downsized to a Shadow Cruiser, factory specs Dry:4210, GVWR:7325. Firstly who is gonna pack 3115 in a camping trailer!? All tanks full would make approx. 900......never happen!I have been towing with a '95 Dodge 3500 DRW CTD and it...
Hello All, Our new TT, "Shadow Cruiser", has come up with a weird one....the air conditioner and heat run together! I was doing normal get ready stuff on a cold morning and decided to run the heater, when I set the thermostat to heat the AC and heat ...
We downsized to a Shadow Cruiser 225 RBS. No problems outside of minor, nearly anticipated new trailer issues. The axles are 3500 lbs. rated. we load heavy on the front due to the little tongue weight. Yes, the lightweights are built "different".Sorr...
Our slide topper did the same thing....bent the roller too! Turns out a bird nest was the cause! Fixed...but always checked for bird nests before operation.Michael
ScottG wrote:The Axles should definitely match. I would replace the remaining one with the same model.As for why the bearing failed? The last person to touch it did something wrong. It was either too tight, too loose or contaminated.I agree with this...
All you need is a heat source, a few pieces of aluminum sheet metal (16 gage), hinges and bit of time. If you are handy you can build one that folds flat....I did this in 1984 for a fishing trip to Alaska....I gave it to the guy who set up the whole ...
