Received a call from KZ-RV parent company of Venture RV, telling me they want to send me the front window for my TT and I was to then set up an appointment with a certified Venture Dealer to have it installed. This was all about a month ago, sense I...
So, hoping the statement in subject line is clear, but if it isn't. I noticed today that the 50amp plug on my main service cable is loose when I turn it into the receptacle on the RV. Can this be tightened by bending the electrical tabs on the recep...
I have the 20' Solera Power Awning it's now five years old and has always worked for me, but......I just noticed today; I extended it but when I brought it back in, it must be moving at about ¼ the speed it used to. It always moved just a little sl...
Sense you added 5 additional outlets, keep in mind the total amps/wattage you are going to strain the existing wire which I assume is #14 that goes to a 15A circuit. Be on the cautious side when adding additional items. The LED will have little eff...
thanks guys. I'm convinced it is the twist lock connector. As stated by Bud, it is big and heavy. There is no way into this molded piece. The receptacle on the RV is in good shape. A right angle 50a connector would probably cost as much as a new cab...
Sometimes a picture really doesn't help, but I'll get one and send it next. Best explanation I have is pull or plug your main cable into your RV and note how tight it is, mine is extremely loose when I plug it in, not normal. All parts look good jus...
It says I'm the manual to not raise with the wheels off the ground. With that being said, when I rase mine that high I put blocks under the wheels. I have a full slide and it can effect that over time.By my research the longest Class C is, the Jayco...
My new motor came today, it was an easy switch over, except for one small surprise. I tied off the arm about two feet from the motorhome wall so as not to let the roller go rolling away when I removed the motor. So I removed two bolts from the moto...
