Hello, I have a project camper that I am working on to get it on the road.It's a 1997 Dutchman. It has a Magnetek 45amp power converter with battery charger. Model# 6345. Everything works fine such as the AC, fridge, water heater and lights but I hav...
Hello!I am working on a Atwood water heater # GC6AA-7P. This unit was missing the pilot light assembly so I had to buy a new one and install it. I bought a Pilot Assembly 9 Jade (Atwood) 91603. I light the pilot manually with a long grill lighter. Th...
Hello,I am working on a 1997 Dutchman with a Norcold 6162 fridge.It works fine on AC but will not stay lit on Gas. I cleaned the burner real good. This unit does not have a thermocouple. Does the spark/ignition sensor somehow tell the board to keep t...
Update: There was no way to slot the holes to slide the pilot assembly in farther so I just bent the L bracket that holds it towards the end of the main tube and now it works! It put the pilot flame close enough to the end of the main tube that the g...
Ok that's what I thought. It did not seem right to me that it sat that far back from the main tube. But since there was not an old one on there I had nothing to compare with. And letting that gas build up in that chamber was not something I wanted to...
OK, don't ask me how, but I went out there to work on it today after work and it just started working! So now the gas valve stays open when the clicking stops. So I will let it run all night and see how well it cools the fridge.Now on to my next prob...
OK,I installed a new spark electrode and it's doing the same thing as before.It will click/spark and it light the bunner. There are small lights on the board that blink with the clicks. Then the clicking stops after 30 seconds or so and the flame goe...
