I soaked the carb in Berrymans Solvent in a can overnight then shook out the carb the next morning. Installed the carb . Fired it up by fiddling with the choke and got it to run about 15 seconds before it died . I messed with the throttle control s...
How do u get at the fuel pump ? Will the assembly slide out a bit or drop down ? How do u get good access to the inside of the Generator ? ANy tips appreciated. Dave.
Cant remember the specific name of the material used on my Coachman Freedom Express Class C, but its the white fiber board material. I was involved in a minor accident recently, and need some spray paint in a can for it. Cant find it at Camping Wor...
IVe used a good quality car wash product that has some carnauba wax in it , and it did a fair job but ive still got some mildew stains / ground in dirt / etc... left on the surface of the RV which is that newer plastic looking exterior panels they ar...
Thanks every one for responding. After some more putzin' , I got it to run pretty smooth. I think I just need to get all the Berrymens Solution out of the carb .What should the generator be set at for voltage output ? Right now, im getting betw...
tboss wrote:David I had to replace mine a couple yrs back and for a little heads up here I purchased mine from Auto zone for 63.00 not 250.00 from onan and its the exactly the same pump down to the serial and part number on the pump...try there bsfo...
fireflock wrote:Which RV? I doubt most have it on a slide. On my RV you can sort of reach the fuel pump. To do major service, I have to drop the generator AND jack the coach a bit to get it out. It's a pain.IVe got a 2008 Coachman Freedom Expres...
donn0128 wrote:Probably either Frilon or fiberglas. Do you want a nice or micky mouse job when your done?Oh, I much prefer a half a_ _ job when im done ; that way it coincides with our Federal Government.
