Anyone know How to remove original shower head swival mount

[Kbs]

I have a 2008 majestic with a plastic shower head swival mount that i need tp replace. However there are no visible fasteners nor can i find a similar one to use as a pattern. Anyone have any ideas how these come off? I know others are replacing them with new shower heads, i just cant figure out how to get the blasted thing off to replace it. Thanks for any help you can provide

I am trying to remove the wall mount that the hand held rests in. Will try the other link listed below.

[Bucky_Badger]

path1 wrote:
Are you trying to undo the shower head? If so, hose just unscrews from shower head and from faucet.

Is this what your trying to remove?

http://www.rvfaucet.com/rv-hand-held-shower-wand/?gclid=CIjRw7-B7M0CFQdbfgodWoQGmA

I think he's probably talking about something similar to this
http://s1.img-b.com/build.com/imagebase/resized/320x320/deltaimages/delta-u5001-a-pk-632.jpg

What I would do is use a hair dryer try to soften the glue and use fishing line behind it to cut it loose

[IAMICHABOD]

You might ask on This Thread there are a lot of Majestic owners there that may be of help.

[path1]

Are you trying to undo the shower head? If so, hose just unscrews from shower head and from faucet.

Is this what your trying to remove?

http://www.rvfaucet.com/rv-hand-held-shower-wand/?gclid=CIjRw7-B7M0CFQdbfgodWoQGmA

[SoundGuy]

If there are no screw heads visible I'd guess it's being held on with adhesive of some sort. I recently installed a swivel shower head bracket in our own trailer, using Marine Goop and a couple of screws. If I were to remove the screws now there's no way the bracket would come loose unless I carefully pried behind it with a flat blade.