โMar-11-2014 03:23 PM
โMar-12-2014 08:53 AM
โMar-12-2014 08:43 AM
โMar-12-2014 08:19 AM
โMar-12-2014 06:03 AM
ahamade wrote:
Ahh ok got ya, so I would take the output from my auto switch box and put that as the 120V into my inverter then the output from my inverter would go into my current WFCO AC/DC panel. I would then disconnect the DC portion of my WFCO panel by say leaving the Converter breaker in the off position. That sound about right?
โMar-11-2014 11:38 PM
โMar-11-2014 11:05 PM
โMar-11-2014 08:31 PM
โMar-11-2014 08:23 PM
ahamade wrote:
If I take the converter out of the equation by cutting its power then when I am plugged into shore power I do not get the benefit of running my 12 volt appliances off of shore power as they will always be running off of the battery. Is that not correct?
โMar-11-2014 07:55 PM
ahamade wrote:That is correct, but your nice new IC will be charging the batteries at the same time. I'm pretty sure it can handle your 12v needs, which is identical to running off a converter.
If I take the converter out of the equation by cutting its power then when I am plugged into shore power I do not get the benefit of running my 12 volt appliances off of shore power as they will always be running off of the battery.
โMar-11-2014 06:58 PM
โMar-11-2014 04:42 PM
ahamade wrote:
Hi, thanks for replying so quickly!
My RV came with an automatic transfer switch for my gen/shore power. I could have the output power from my transfer switch to go to just my inverter but then my converter is no longer usable because I do not want the 120V output from my inverter to go to my WFCO Power Center (converter).
Basically I would like to have my inverter connected in a way that I can still use my RV as I do today but with the ability to have 120V power when dry camping.
One thing also, since the inverter has a charger I no longer want to use the charger from my converter. I would much rather the battery charging to come from the inverter. I am not sure if its possible to disable the battery charger feature on the converter but it still work as it normally should.
BTW I don't see the flow chart.
โMar-11-2014 04:41 PM
โMar-11-2014 03:48 PM
โMar-11-2014 03:32 PM