โFeb-12-2017 09:20 AM
โFeb-12-2017 12:34 PM
โFeb-12-2017 12:06 PM
โFeb-12-2017 11:26 AM
DrewE wrote:x2
(If it's running on inverter power, and not pass through, then presumably the inverter's protection circuits would limit current by shutting down.)
โFeb-12-2017 11:23 AM
bigbillsd wrote:The 30 amp should trip before it overheats.time2roll wrote:
You do not need a main as shown in the picture.
If there is no main, what would protect the inverter from both circuits pulling 20amps and overheating the 30amp circuit to the inverter? I understand that scenario probably shouldn't happen, But..
โFeb-12-2017 11:16 AM
โFeb-12-2017 11:02 AM
bigbillsd wrote:time2roll wrote:
You do not need a main as shown in the picture.
If there is no main, what would protect the inverter from both circuits pulling 20amps and overheating the 30amp circuit to the inverter? I understand that scenario probably shouldn't happen, But..
โFeb-12-2017 10:41 AM
โFeb-12-2017 10:32 AM
time2roll wrote:
You do not need a main as shown in the picture.
โFeb-12-2017 10:23 AM
โFeb-12-2017 10:01 AM
โFeb-12-2017 09:59 AM
โFeb-12-2017 09:58 AM