Aug-04-2013 11:34 AM
Mar-10-2014 02:11 PM
Aug-14-2013 08:22 AM
Aug-13-2013 10:38 AM
DonL100 wrote:
Thanks Gus. I know that aluminum is non- magnetic. I was going to fasten a piece of iron to the roof with silicone but the main thing was the ground. The question is, does the antenna need to be grounded by the surface it is placed on? Or, is it grounded through the radio? Some magnetic CB antennas need to be grounded by the surface they are put on. For instance, if you put a thin piece of plastic tape on the surface between the antenna, the magnetic antenna will still stick to the metal but it won't be grounded. I hope this is clear. Thanks, Don
Aug-13-2013 09:05 AM
Aug-12-2013 05:40 PM
Aug-12-2013 11:06 AM
Aug-07-2013 05:34 PM
Aug-07-2013 02:39 PM
Aug-06-2013 01:46 PM
Aug-05-2013 06:56 PM
SJR wrote:RFW63050 wrote:
My antenna sits on my dash. And I don't have problems.
X2
Aug-05-2013 06:26 AM
RFW63050 wrote:
My antenna sits on my dash. And I don't have problems.
Aug-05-2013 06:12 AM
Aug-04-2013 03:45 PM
Aug-04-2013 03:18 PM