The post for class a is so long I thought I'd start my own.
The rear cap on our rig is three pieces, one, quarter round piece of fiberglass on the top, and two flat panels of filon with a slight angle where the two pieces meet. The "Fleetwood "C" channel that covered the joint(really a 3/8 to 1/2" gap) was not installed properly and the bottom piece was slipping out from under the channel. Last week I realigned the channel and reattached it to the rear cap, primed it and finished some other work. Today I sanded the fine edgeline of the primer so I could feather the touch up paint and painted the channel and immediate area. Can't wait for the DW to drive up and notice that the rear cap is now all one smooth, even, shiny color.
I touched up another area at the same time and tomorrow I'll rub them out
"I travel not to go anywhere, but to go. I travel for travel's sake. The great affair is to go". R. L. Stevenson
David Bishop
2002 Winnebago Adventurer 32V
2009 GMC Canyon
Roadmaster 5000
BrakeBuddy Classic II