โJun-14-2015 01:51 PM
โJun-15-2015 05:16 AM
โJun-14-2015 10:01 PM
Vannnce wrote:
Are you getting the same voltage measuring hot leg to neutral as you are measuring hot leg to ground?
โJun-14-2015 06:22 PM
โJun-14-2015 05:13 PM
โJun-14-2015 03:00 PM
kaydeejay wrote:ScottG wrote:Ditto.
I would double check his connections for looseness and heat.
If he pulled the new connection after the meter but before the main house panel and the house is at 120V, then there HAS to be a loose connection somewhere between where he hooked up and the outlets in the pedestal.
I would start with a voltmeter INSIDE the pedestal to see what you are getting there, then work back to where he hooked in.
Good luck, and BE CAREFUL, you may be messing with 240 Volts if he hooked up a real 50A service!
โJun-14-2015 02:22 PM
โJun-14-2015 02:18 PM
โJun-14-2015 02:13 PM
ScottG wrote:Ditto.
I would double check his connections for looseness and heat.
โJun-14-2015 01:53 PM