Hi all, I have a 25' Alpenlight, and all of a sudden I have no power. I plug it in and I can hear a hum but there is no power to anything. Also no battery power, and batteries are charged. I checked the fuse box and they all look good, is there a master fuse that I haven't found?Does it sound like a bad inverter/converter? Thanks ....
Unless your batteries are completely dead or shot, failure of both the 110Volt and 12volt sides of the electrical system is highly unlikely. Can you elaborate on what you mean by "no power"?
Keith J. Sold the fiver and looking for a DP, but not in any hurry right now.
Check the master breakers near the battery. Check the incoming power at the pedestal, check the fuses and breakers at the converter. Get a VOM and learn how to use it. They are one of the best investments you can make for your tool box.
Formerly posting as "littleblackdog" Martha, Allen, & Blackjack 2006 Chevy 3500 D/A LB SRW, RVND 7710 Previously: 2008 Titanium 30E35SA. Currently no trailer due to age & mobility problems. Very sad! "Real Jeeps have round headlights"
When you say "fuse box" are you including the circuit breakers?
Ron & Sandie 2013 Tiffin Phaeton 42LH Cummins ISL 400hp Toad: 2011 GMC Terrain SLT2 Tow Bar: Sterling AT Toad Brakes: Unified by U.S. Gear TPMS: Pressure Pro Member of: GS, FMCA, Allegro
When you say "fuse box" are you including the circuit breakers?
Ron & Sandie 2013 Tiffin Phaeton 42LH Cummins ISL 400hp Toad: 2011 GMC Terrain SLT2 Tow Bar: Sterling AT Toad Brakes: Unified by U.S. Gear TPMS: Pressure Pro Member of: GS, FMCA, Allegro