Tongue jack, anyone replaced yours ?

[3fan4evr]

If you have, what make / model did you install ?

[Bad_Brad]

The one that came on my Raptor was a POS. I had good experience with one I put on my previous Toyhauler...I bought another Atwood. Excellent!

[mrkoje]

Scooter86 wrote:
I put a Husky 4500 on my th this spring. The only complaint(minor) is the led lights are useless. Otherwise it has worked well so far .

That is what I am looking at for my TH as well. I currently have an Atwood and I'm not ever sure the weight rating on it. The atwood does the job but I think it's getting maxed out. I would like something beefier and it seems the Husky is the only 4500lb out there.

[Scooter86]

I put a Husky 4500 on my th this spring. The only complaint(minor) is the led lights are useless. Otherwise it has worked well so far .

[Geno92308]

I needed to and went with a 3500 electric. I can't remember what brand but it wasn't atwood or barker. I think it was a bull with bearings.

I see costco.com sells an electric 3500 with good specs and an awesome return policy.

I had to add wiring for mine, so I added an additional fuse box in the front. Nice to have an outdoor rated cigarette plug up front.

So glad I don't crank anymore.

[coolbreeze01]

Dakota98 wrote:
"ABSOLUTELY CHECK THIS ONE OUT"

I put this on my TT a couple of months ago & couldn't be happier !!!!

You won't believe the "reviews" & cost of this jack.

I don't how this happened, I ordered it on a Monday @ noon. It was on my doorstep the next day @ noon.

http://www.amazon.com/gp/product/B00B9J21QW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Dealer put one of these on our TH as a freebe. Must have changed the name, mine says RAM. Works great but needs to be covered to keep rain out.

[Bedlam]

I replaced the Atwood 3000 with a Bulldog 4000 on my Weekend Warrior. It has a leveling bubble built in along with LED lighting and manual crank. After about five years the Atwood would occasionally bind even after I tore it down, cleaned and lubed it. There was too much slop in the parts.

http://www.bulldogproducts.net/products/trailer-jacks/powered-jacks/powered-a-frame-jack-4000-lbs-/U...

[3fan4evr]

After looking them over, I went with the Barker 31558. The 24" travel sold me.

[fla-gypsy]

Dakota98 wrote:
"ABSOLUTELY CHECK THIS ONE OUT"

I put this on my TT a couple of months ago & couldn't be happier !!!!

You won't believe the "reviews" & cost of this jack.

I don't how this happened, I ordered it on a Monday @ noon. It was on my doorstep the next day @ noon.

http://www.amazon.com/gp/product/B00B9J21QW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

The reviews are good and the price is right

[Dakota98]

"ABSOLUTELY CHECK THIS ONE OUT"

I put this on my TT a couple of months ago & couldn't be happier !!!!

You won't believe the "reviews" & cost of this jack.

I don't how this happened, I ordered it on a Monday @ noon. It was on my doorstep the next day @ noon.

http://www.amazon.com/gp/product/B00B9J21QW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

[mrkoje]

I'm going to be replacing my soon - was looking at the Husky 4500 - I haven't seen anything beefier yet.

[fla-gypsy]

I bought an UltraFab 3500 7+ years ago. It has been stellar

[Y-Guy]

Dick_B wrote:
I replaced a 2500 lb. jack with a 3500 lb. model. Don't skimp on the capacity since you are usually lifting both the front of the RV and the back of the TV.

I'll second this. Toy Haulers are heavy, buy the largest one you can find.

[Dick_B]

I replaced a 2500 lb. jack with a 3500 lb. model. Don't skimp on the capacity since you are usually lifting both the front of the RV and the back of the TV.

[old_guy]

I bought a barker and used it for 20 years. darn good jack, will buy another when the time comes.