Jun-06-2013 11:57 AM
Jun-08-2013 12:28 PM
dougrainer wrote:frankdamp wrote:
Back in the early 1970's, I worked with a guy in Virginia who had been an engineer at Open Road, down in Florida. OR often had their engineers drive a new rig to a dealership, to give them some experience driving what they were designing.
Dave recalled taking a Chevy-based Class C to a dealership in San Diego. The bare chassis had been driven from Detroit to Florida, then driven to different suppliers locally for things to be installed (they had Midas put the exhaust system on) By the time he left Florida, the rig already had 2200 miles on the odometer. By the time it got to the dealership, it was pushing towards 6000!
Dave's group looked into shipment by rail to minimize the accumulation of road miles. They put two new rigs (a Class A and a Class C) on a low-loader railcar and sent them from Florida to Chicago. Dave and his boss went to bring the rigs back for evaluation. When they opened the rig doors in Chicago, the entire interiors of both had collapsed into matchwood in a big heap on the floor.
I think they got the truck chassis shipped by rail a few times, but the suspensions were so beat up on arrival, they quit doing that also.
I believed what you wrote until you mentioned the railroad item. What BS. I WORKED in Elkhart, IN back in the 70s and remember the experiment that Coachmen and a few others tried by Railroad. The Rail has NO BEARING on the body or frame of a motorhome chassis. They determined that vandalism and the cost to off load and then transport from the railhead was more expensive and time consuming that having them driven over the road. My Wife works for BNSF railroad and I can guarantee that all railcars have springs and suspensions that will not damage cargo. Besides, from what you state, would not Automobiles be destroyed when transported by rail??????? There is NO way a bare chassis could be transported over the road by driving. ANY Police officer would stop and impound such a thing immediately, even in the 70's. Doug
Jun-08-2013 08:53 AM
Jun-08-2013 08:36 AM
Jun-08-2013 08:22 AM
JALLEN4 wrote:VinCee wrote:
The question I would have is what is the legal definition of new and or used? Their must be some threshold of how many miles can be on a vehicle before it is considered used. I believe with cars it is 2500 miles, though I realize cars are transported by trailer. When I bought my Georgetown from RV Net they told me they have trailers to move class A's from their four different stores.
In most states it is simply whether or not it has been titled. Without a mileage stipulation. You can have a 1 mile used vehicle and also have a legally new vehicle with 3,000 miles.
Jun-08-2013 05:19 AM
Jun-07-2013 03:18 PM
Jun-07-2013 02:31 PM
Jun-07-2013 01:53 PM
Jun-07-2013 12:44 PM
VinCee wrote:
The question I would have is what is the legal definition of new and or used? Their must be some threshold of how many miles can be on a vehicle before it is considered used. I believe with cars it is 2500 miles, though I realize cars are transported by trailer. When I bought my Georgetown from RV Net they told me they have trailers to move class A's from their four different stores.
2021 Nexus Viper 27V. Class B+
2019 Ford Ranger 4x4
Jun-07-2013 12:41 PM
VinCee wrote:
The question I would have is what is the legal definition of new and or used? Their must be some threshold of how many miles can be on a vehicle before it is considered used. I believe with cars it is 2500 miles, though I realize cars are transported by trailer. When I bought my Georgetown from RV Net they told me they have trailers to move class A's from their four different stores.
Jun-07-2013 12:31 PM
VinCee wrote:
The question I would have is what is the legal definition of new and or used? Their must be some threshold of how many miles can be on a vehicle before it is considered used. I believe with cars it is 2500 miles, though I realize cars are transported by trailer. When I bought my Georgetown from RV Net they told me they have trailers to move class A's from their four different stores.
Jun-07-2013 12:28 PM
frankdamp wrote:
Back in the early 1970's, I worked with a guy in Virginia who had been an engineer at Open Road, down in Florida. OR often had their engineers drive a new rig to a dealership, to give them some experience driving what they were designing.
Dave recalled taking a Chevy-based Class C to a dealership in San Diego. The bare chassis had been driven from Detroit to Florida, then driven to different suppliers locally for things to be installed (they had Midas put the exhaust system on) By the time he left Florida, the rig already had 2200 miles on the odometer. By the time it got to the dealership, it was pushing towards 6000!
Dave's group looked into shipment by rail to minimize the accumulation of road miles. They put two new rigs (a Class A and a Class C) on a low-loader railcar and sent them from Florida to Chicago. Dave and his boss went to bring the rigs back for evaluation. When they opened the rig doors in Chicago, the entire interiors of both had collapsed into matchwood in a big heap on the floor.
I think they got the truck chassis shipped by rail a few times, but the suspensions were so beat up on arrival, they quit doing that also.
Jun-07-2013 09:54 AM
Jun-07-2013 08:50 AM