Atwood 3 burner stove grate

[beckid]

My 3 burner stove grate is getting pretty corroded. I can't seem to find a replacement anywhere. Sure there is one on ebay and Amazon with one single support running vertically down the middle, but my original has 2 vertical support thingies and I'd like to find one that matches. I looked for Atwood parts suppliers and that was not successful. Any ideas on where I'm might find a replacement? TIA

[TropicalRV]

Get an induction cooktop. Our MH is 3 years old and we've never used the gas stove but one time.

[obiwancanoli]

Yeah, I learned just a few days ago (I had to call them, too) that Dometic bought out Atwood... Once I got to the right place, they were most helpful

[beckid]

Dometic! Why didn't I think of that! Will try that today thank you!

[obiwancanoli]

You can try calling Dometic directly - their Parts Department contact number is 800-366-3842.

[beckid]

My former rental is doing great! We are super happy with it still!

I did try the Atwood website with no dealers near us and some of the dealers listed are no longer in business. I do like the idea of sandblasting and repainting. As for model number, I can't find it but the stove oven combo is 10 years old.

[rgatijnet1]

Call any of the many salvage yards and you should be able to find what you need. Even if the salvaged coach was destroyed by fire, the grate should still be fine.

[Old-Biscuit]

Sure would be helpful if OP posted actual MODEL Number then at least a part number could be found and check for availability

Atwood 3 burner stove is not very descriptive as there are NINE different categories for ATWOOD Ranges

[IAMICHABOD]

Hey Bekid good to hear from you again,hows that Former Rental doing?

You might give Star Deck a call,they took over all of Walts inventory when he went under, but I think they just may have what you want.

[D_E_Bishop]

Try the phone numbers given on this site.

Atwood

[Gottahaveit]

Not sure what brand mine is but the grates don't look bad but...they sure are warped and hard to get the pan to lay flat. :h Maybe I shouldn't cook so much LOL

[Artum_Snowbird]

I had mine sand blasted and given a high temperature paint job. Looked like new again.