cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Class A Wind Handling

themoons
Explorer
Explorer
We just upgraded our 27' class C to a 2016 35' class A Winnebago Sunstar LX. My biggest trepidation in the upgrade is how it will handle in the wind. I have read several things about gas class A coaches being much better than they used to be, and some have said Winnebago is generally on the better end, but I'm wondering if anyone has had experience with this particular model or something similar. Am I going to be spending more time waiting out the wind storms, or will it be pretty reliable? Should I consider adding sway bars to the axles (I might be using the wrong terms here, but I have heard you can add some stability that way.) I'd love any other tips or input anyone might have.
18 REPLIES 18

Smitty77
Explorer
Explorer
As covered by others already, many variables in coaches and wind related handling. For some coaches, aftermarket component additions can be of great help. But some coaches, usually the entry level of a manufacturer, have way too much 'tail hang'. Shorter chassis, but still longer coaches, are not a good formula in the wind. While add on components will help this some, these coaches will never be as good of handling in the wind, as those with better Wheel Base to Coach Length proportions.

And yep, many call it snake oil, but I've personally seen the improvements in especially shifting wind conditions, of using Air Tabs. I did do many of the handling components add on's and shocks to our 99 F53 18K Chassis (T-28 Bounder, so did not have much of a tail hang, compared to many I've seen on the road:)!).

If you find that the wind does disturb you while driving, and decide to improve suspension and handling, consider Air Tabs in that mix too. Not expensive, and even after all of the other mod's I made - they really helped too. Cumulative in my specifics.

And no matter what I had done to the Bounder, no comprising to a DP with Tag:)!

Best of luck to you,
Smitty

GHOST1750
Explorer
Explorer
I had a 39 ft. National Tradewinds and twice I had the pleasure of driving it in Misspuri and Oklahoma in winds that were blowing semis over and I could see my tow whippin back and forth behind me but felt little affects, that was a diesel, then I picked up my 40 ft. Newmar Canyon Star and headed across the desert with 43 MPH cross wind gusts, Stopped at a roadside rest and had lunch with the coach rocking slightly but it handled great. Just slow down and expect the worse and wait for that next gust, if it's too bad get off the road.
Just Don and a Chiuahua called Dulce
2003 39' Tradewinds LE
2002 Cavalier tow
Korean Veteran, USAF
FMCA F357981
CC4C
GOOD SAM

Life is a journey, not a destination !

tropical36
Explorer
Explorer
dubdub07 wrote:
I have been very happy with the way my MH rides in the wind. I am wondering if a front engine vs a rear engine makes any difference.

Most likely with the chassis engineering itself and above all with any coach, the amount of overhang behind the rear wheels.
Most DP's have little and have seen some gassers, that look like the tail is about to wag the dog, while it's still sitting still.
We had an old gasser with a tag once and went across three states in the SW with a terrible cross wind. Never did stop, except for overnight and with the all the rocking, we couldn't even put the slide out.
"We are often so caught up in our destination that we forget to appreciate the journey."

07 Revolution LE 40E_Spartan MM_06 400HP C9 CAT_Allison 3000.

Dinghy_2010 Jeep Wrangler JKU ISLANDER.

1998 36ft. National Tropi-Cal Chevy Model 6350 (Sold)

wolfe10
Explorer
Explorer
dubdub07 wrote:
I have been very happy with the way my MH rides in the wind. I am wondering if a front engine vs a rear engine makes any difference.


The answer is that IT COULD.

Weight distribution is important in handling. In a DP, if heavy components are located too far back (have even seen generators put just in front of a rear bumper on a diesel pusher), the front axle is underloaded. This leads to poor handling and more susceptibility to blowing in cross winds.

Front engine vehicles should (yes, should, not DO) have better weight distribution. Much of this depends on the length of the rear overhand and weight of what is behind the rear axle.
Brett Wolfe
Ex: 2003 Alpine 38'FDDS
Ex: 1997 Safari 35'
Ex: 1993 Foretravel U240

Diesel RV Club:http://www.dieselrvclub.org/

dubdub07
Explorer
Explorer
I have been very happy with the way my MH rides in the wind. I am wondering if a front engine vs a rear engine makes any difference.
2013 Fleetwood Discovery 40G
TOADS: 12 Jeep JKUR Wrangler, 16 Cherokee Trailhawk, 15 Grand Cherokee, 13 RAM 1500 Longhorn (not a toad) American STEEL = American profits
RET USAF MSGT (26yrs) and still DoD ATC.
DW,DS,DD in the MH w/Westley the killer PUG!

FloridaRosebud
Explorer
Explorer
FIRE UP wrote:
Twomed wrote:
It's a box...physics can not be overcome. At some point you will be uncomfortable, find that point and know when to pull over.


Without a doubt, one of the best answers I've ever seen on here, period. At the risk of sounding a bit caustic, if one is gonna buy one these rolling Kleenex boxes, one is gonna have to put up with any and all consequences of driving it. Wind, rain, bad roads, effects from passing and oncoming 18 wheelers, up hill, down hill, long grades, tight passages like the 550 in Colorado, and more and more. Driving these is not the same as driving a VW. Concessions have to be made and or learned.

Get out there and drive it. If the wind comes up, deal with it. We'd all like to have PERFECT driving conditions, for every mile we travel, AIN'T HAPPENING!!!!
Scott


/\ This. As I've mentioned before, it didn't take me long this past year to learn the MH TELLS ME how fast it wants to go, not the other way around. To much wind - slow down. Super rough road - slow down. My rule #1 - I'm never in a hurry. Rule #2 - If I get in a hurry refer back to rule #1. As both FIRE UP and Chum Lee has said in one of my threads, it's not a race car. It's not even an SUV. It's a huge top-heavy box rolling down the road.

Al

FIRE_UP
Explorer
Explorer
Twomed wrote:
It's a box...physics can not be overcome. At some point you will be uncomfortable, find that point and know when to pull over.


Without a doubt, one of the best answers I've ever seen on here, period. At the risk of sounding a bit caustic, if one is gonna buy one these rolling Kleenex boxes, one is gonna have to put up with any and all consequences of driving it. Wind, rain, bad roads, effects from passing and oncoming 18 wheelers, up hill, down hill, long grades, tight passages like the 550 in Colorado, and more and more. Driving these is not the same as driving a VW. Concessions have to be made and or learned.

Get out there and drive it. If the wind comes up, deal with it. We'd all like to have PERFECT driving conditions, for every mile we travel, AIN'T HAPPENING!!!!
Scott
Scott and Karla
SDFD RETIRED
2004 Itasca Horizon, 36GD Slate Blue 330 CAT
2011 GMC Sierra 1500 Ext Cab 4x4 Toad
2008 Caliente Red LVL II GL 1800 Goldwing
KI60ND

Chum_lee
Explorer
Explorer
Manufacturers design their chassis with a certain amount of sway built in. It's there to let you know when things are getting a little hairy out there. If you intentionally reduce that safety margin by stiffening your suspension, well, . . . . bad things can happen pretty fast. If you are seeing 80,000 lb. 18 wheel trucks blown over, you might want take that as a hint to get off the road.

Of course worn shocks and suspension/steering parts should be replaced as soon as possible. Upgrading within reason makes sense.

Chum lee

Dutch_12078
Explorer II
Explorer II
When we moved from a Class C to a Class A years ago, I noticed pretty quickly how much better it handled windy conditions and large trucks or buses passing us.
Dutch
2001 GBM Landau 34' Class A
F53 chassis, Triton V10, TST TPMS
Bigfoot Automatic Leveling System
2011 Toyota RAV4 4WD/Remco pump
ReadyBrute Elite tow bar/Blue Ox baseplate

raylance
Explorer
Explorer
I have a 2015 Vista 35B without any add ons. It does fine in the wind. I have no complaints.

themoons
Explorer
Explorer
This is all great information. Thanks to everyone for your input. I'm going to look into all of these.

Dale_Traveling
Explorer II
Explorer II
Long post but I've pretty much have run out of stuff I can bolt to the chassis. In order based on what I thought returned the best bang for the buck-

Cheap Handling Fix (aka CHF) - Very long posting on IRV2.com. Basically changing the dynamics of the Ford installed sway bars to increase body sway resistance. IRV2 CHF Thread. My cost $0

Tire pressure - Either use the builder's placard listed pressures or get the coach weight checked with you normal loading (including people) and set the tire pressure per the tire OEM charts. I noticed at around 10 or 15 PSI high for cold pressure I could not keep the coach in lane. My cost $10 at a Cat Scale.

Koni Shocks - Was a bit hard on the coach budget (about $150 each) but ended up being a nice ride improvement over original. My cost around $450.

Panhard bar, track bar, or track rod - CHF reduced but did not eliminate tail push caused by cross winds or passing vehicles but once I added a track bar I've been surprised by 18 wheelers that suddenly appeared at my left elbow. My cost $600.

For wind handling I would not go much further. I have other add ons (air bags, steering stabilizer) but for the most part the what I listed had the most dramatic effect to counter wind.

Was out when the a edge of Hurricane Sandy passed by. Constant 30 to 40 MPH cross winds but the coach movement was very manageable

Almost forgot, the coach is build on a 2006 18K lbs GVWR F53. Normal load weight is around 17,250 and I tow a 2005 Honda CRV which weighs around 3500 lbs. Your results will naturally very.
2006 Hurricane 31D built on a 2006 Ford F53

rgatijnet1
Explorer III
Explorer III
I also installed the air bags in all four corners with a dash control to inflate or deflate them. When traveling in the Great Plains when it was windy I would just increase the air to provide a stable ride. Once the wind passed, I could deflate them for a smoother ride. Anti-sway bars stiffen the ride at all times, which I did not want.

1492
Moderator
Moderator
Moved from Forum Posting Help and Support