powderman426 wrote: I see you have a post about Jack's not working also. This suggests that it's electrical. Either dead batteries or possibly a safety interlock problem. Do all the other electric operated devices work?
roger that. DMM time.
99 Fleetwood Vision 36Zulu V10 Gas F53 Chassis Hyd Leveling man/keypad (Powergear) Electric Slideouts (Powergear) x2 2005' 4020 Fadal 4Axis CNC Mill w/24Datc Hendy 16x72" WWII Navy Lathe 1800RPM
I see you have a post about Jack's not working also. This suggests that it's electrical. Either dead batteries or possibly a safety interlock problem. Do all the other electric operated devices work?
Ron & Charlotte WD8CBT since 1976 32' Gulfstream Ameri-Camp & 05 Ram QC LB
I started with nothing and I still have most of it left
I never fail, I just succeed in finding out what doesn't work
seatboard wrote: Whack the motor a few times with a hammer. For a while,This worked for me but finally I had the motor replaced. It was not as expensive as I thought it would be to have it replaced. The reason it was not as expensive as I expected was I didn't take it to CW.
Whack the motor a few times with a hammer. For a while,This worked for me but finally I had the motor replaced. It was not as expensive as I thought it would be to have it replaced. The reason it was not as expensive as I expected was I didn't take it to CW.
Harold and Faye US Navy Retired 2006 Fleetwood Revolution 40LE 400 cat
4 whopping cylinders on Toyota RV's. Talk about great getting good MPG. Also I have a very light foot on the pedal. I followed some MPG advice on Livingpress.com and I now get 22 MPG! Not bad for a home on wheels.
