โMay-07-2017 01:23 PM
โMay-09-2017 06:08 PM
chobe2 wrote:tomman58 wrote:
I normally cut a 1/2 piece of trim to fit and glue it to each end and in the middle (pour has two door)on each location I use a piece of wood that fits insie to glue to then afix it to each end. Our stuff never moves and the cabinet is really packed with stuff.
Do you have any photos?
โMay-09-2017 08:13 AM
โMay-09-2017 06:47 AM
tomman58 wrote:
I normally cut a 1/2 piece of trim to fit and glue it to each end and in the middle (pour has two door)on each location I use a piece of wood that fits insie to glue to then afix it to each end. Our stuff never moves and the cabinet is really packed with stuff.
โMay-09-2017 06:40 AM
โMay-09-2017 06:30 AM
โMay-08-2017 08:34 AM
thestoloffs wrote:
The single magnet used to hold the door closed is fine for a house, but not a rolling house!
We found a bungee cord attached to suction cups on either end @ Bass Pro's marine section.
Attach it on either side of the cabinet as a whole, and pull the cord down to open the cabinet.
โMay-08-2017 07:19 AM
โMay-07-2017 03:22 PM
Trackrig wrote:
We use these plastic containers from Bed, Bath & Beyond or The Container Store. Under them, we use the white rubberish non-skid material.
[img][/img]
Bill
โMay-07-2017 02:59 PM
โMay-07-2017 02:55 PM
โMay-07-2017 02:43 PM
โMay-07-2017 02:17 PM
โMay-07-2017 02:15 PM
โMay-07-2017 02:12 PM