Feb-14-2019 03:21 PM
Feb-25-2019 05:21 AM
CharlesinGA wrote:CLICK HERE to see perfect pictures of Charles description of the Sprinter cut-away chassis. There are also some pictures of a Transit, though with a work truck module on it's back.
The Mercedes Sprinter van is a unibody design, with U shaped frame rails, with flanges, spot welded to the underside of the floor of the van. When they made the cab and chassis for motor homes, ambulances, and cargo vans, they took those same U shaped frame rails and made a similar, inverted U shaped section with flanges and welded the top and bottom together. This puts the top of the chassis rails a good 4 inches or so above the cab floor. In addition, my Winnebago View has a floor like the sandwich buildup of plywood, foam and aluminum bottom skin, similar to what Ron shows for the Phoenix. This sits on top of inverted aluminum flanged u channel and thus the coach floor is a good 6 or seven inches above the cab floor. On the Sprinter chassis, there is no other good way to build it.
With the Ford, the top of the frame rails will be below the cab floor, so the additional thickness of the floor sandwich is not as pronounced, it starts out below the cab floor, instead of 5 or so inches above the cab floor.
Charles
Feb-24-2019 06:41 PM
Feb-23-2019 10:48 AM
bobndot wrote:
pnichols RV Market, do you deliver ? :B
I need ,
one 2 gal propane tank
12v hi volume fan
1500w electric heater
100' of hose
one outside table
Feb-23-2019 09:46 AM
Feb-23-2019 08:54 AM
Feb-23-2019 07:06 AM
Feb-22-2019 06:41 PM
Feb-22-2019 03:16 PM
Feb-22-2019 09:30 AM
Feb-22-2019 08:56 AM
Feb-19-2019 06:18 AM
Feb-16-2019 05:57 PM
Feb-15-2019 09:32 AM
egh33 wrote:Hi egh33,
I have been checking around. Do they make a Class C with out the step down to the drivers & passenger seat from the main coach? Also one that doesn't have the bunk bed over the cab, I seen one along time ago that had an entertainment center up there instead of the bed. I can't remember what make it was and haven't seen one since. I'm thinking about down sizing if I can find one.
Thanks
Feb-15-2019 09:00 AM