Where to find wiper arms, not just blades

[beaubeau]

Where can I find a replacement wiper arm for my 2008 Allegro Open Road Freightliner?

I need the whole arm, not just the blade -- the existing one broke right at the end where it mounts.

Thanks

[mtrumpet]

I take it that yours are not the long ones then?

[beaubeau]

I am the OP and yes, that's for the arm. The blades were $21 each.

[mtrumpet]

beaubeau wrote:
I got smart -- just called Tiffin. They had what I needed, in stock, $28 each 🙂
Thanks for all the help!

Only $28.00 each for wiper arm assembly's??

[beaubeau]

I got smart -- just called Tiffin. They had what I needed, in stock, $28 each 🙂
Thanks for all the help!

[mtrumpet]

It just so happens that I replaced both of my wiper arms a couple of weeks ago. The best price that I found was at:
www.partdeal.com

The part number and description for my particular wiper arms was as follows:
Wiper Arm ISO Double Shaft Dyna Pantograph 31.5 in. Wet - 200487N by Wexco

"31.5" inch is the length of the arm. (They available in different lengths.)
"Wet" means that it has the hose and nozzles for the windshield wash.

Price for the above were $57.00 each. This was cheapest that I found online. Some other places wanted as much as $94.00 for the exact same item.

I started by searching online:
2002 NEWMAR DUTCH STAR WIPER ARM

[Moondaddy]

Try a larger jobber, they will probably need your old arm to match.
Have looked at large truck stops and only have replacement blades.
Industry has quit handling refills. Also the 31 inch blades aren't available any longer, 28 inch is the longest I could get. I felt luck that the adjustable replacement arm for my Monaco was still available.

[Nick-B]

gsander1 wrote:
http://www.amequipment.com/

X2 on AM Equipment but his is the link to the actual store:
http://store.amequipment.com/

[khager76248]

I got one for one of my cars at a junk yard. It was going to be 12.00 but he gave it to me free, because I went and pulled it off the car.(I guess he felt sorry for me since I am a female)

[gsander1]

http://www.amequipment.com/

[Campinghoss]

I bought entire assemblies thru this folks. They are reasonably priced and really good.

http://www.dieselequipment.com/index.php/shop/

[ets1996]

X2 on the Rometruckparts.com They helped me a couple times. Good service very helpful.

[Jones1]

rometruckparts.com

[beaubeau]

Thanks again, that could be just what i need!

[darsben1]

Is it a standard arm?
Pantograph arm?
If a standard ARM go to a NAPA with a TRUCK counter. Not a local rinky dink NAPA but a big one in a bigger city. I cannot recommend where to go because you listed no location.
DO you know the length you need?
TRy NAPAONLINE.COM but the website is not friendly for finding the arm by length