โJun-01-2016 08:04 AM
โJun-03-2016 08:38 AM
aguablanco wrote:
Just a quick question. Don't the manufacturers weld the battery angles and propane mounts to the a frame? If it was such a bad idea I don't think it would be a standard practice for as long as it has been done. Just wondering.
RichH
โJun-03-2016 08:11 AM
โJun-03-2016 07:49 AM
PackerBacker wrote:
Just use high speed/temp drill bits; start really small and work bigger with larger bits.
jackquontee wrote:
Thanks for that bit of information. I have now tried twice to drill into the frame on two different campers (the second time just this past weekend) and all it resulted in was a "walking" effect on the bit, and I ended up ruining two of the bits. Couldn't figure out what the problem was.
โJun-02-2016 06:12 PM
PackerBacker wrote:
Just use high speed/temp drill bits; start really small and work bigger with larger bits.
โJun-01-2016 11:56 PM
โJun-01-2016 03:45 PM
โJun-01-2016 12:30 PM
โJun-01-2016 11:00 AM
โJun-01-2016 10:01 AM
โJun-01-2016 09:31 AM
โJun-01-2016 09:21 AM
โJun-01-2016 09:19 AM
โJun-01-2016 09:16 AM
โJun-01-2016 09:15 AM