Flame MUST engulf spark electrode when it lights off
Spark electrode needs to be clean-----emery/crocus cloth
Ceramic on spark electrode if cracked will allow ground tracking...wipe down using a rag with silicone sprayed on it
Contacts on high tension wire at board or electrode must be clean/tight
Flame has to 'prove' it lit
It does this by flame ionization which actually generates a millivolt signal that goes back to circuit board.if circuit board doesn't get this signal it shuts down gas valve
Is it time for your medication or mine?
2007 DODGE 3500 QC SRW 5.9L CTD In-Bed 'quiet gen'
2007 HitchHiker II 32.5 UKTG 2000W Xantex Inverter
US NAVY------USS Decatur DDG31