Lippert auto levelers hose leak

[luberhill]

Ok notice the front retract hydraulic hose has a bad spot and it’s dripping,, it says 24865430
Do I need to go to Lippert to buy ??

[D_E_Bishop]

luberhill wrote:

D.E.Bishop wrote:
There is a pretty extensive Winnie owners club on line, you might post there as a warning to others or verify with them that it is common.

Do you know the name of it

Search Winnebago Owners in "Yahoo Groups" and look for a tab in "Winnebagoind.com".

[luberhill]

Does anyone know a site where I’d be more apt to find owners of the same coach I have ??

[luberhill]

D.E.Bishop wrote:
There is a pretty extensive Winnie owners club on line, you might post there as a warning to others or verify with them that it is common.

Do you know the name of it

[luberhill]

I cant believe they built this thing with these hoses making such a sharp tight bend,,,NEVER do that with hydraulic hoses

[D_E_Bishop]

There is a pretty extensive Winnie owners club on line, you might post there as a warning to others or verify with them that it is common.

[luberhill]

Id suggest anyone who has this system check theirs, Im sure mine are not the only bad ones

[luberhill]

so I called Lippert and told them the second hose was junk after checking all of them..this hose goes from the drivers side front jack to the passengers side front jack, it the orange retract hose.
They are sending me a new one free...
Guys check yours,,,its like the outter covering has pulled avawy from the inner hi pressure host.
If it blows the jack will not stay up or retract...
The hoses are real cheesy

[donn0128]

Might as well do all of then tomorrow.

[luberhill]

Fricken junk hoses ,, now the other one that goes from drivers side front to pass side front, another orange: red one is ready to burst? The putter covering you can squeeze feels like fluid under it
Guess I know what I’ll be doing tomorrow
2013 with only 16k and these hoses are already shot ??
They are just 1/4 cheap junk
The replacements are MUCH better

[luberhill]

Yea it’s a MH and I cycled it 3 or 4 times,, still has a few little bubbles on top of the fluid but works fine

[Cummins12V98]

Retract everything with it hitched. Fill to proper level then cycle everything a few times and top off if needed.

[luberhill]

Got the new one made 56.00 but a much better quality
Now to see if it gets air in the system

[luberhill]

Yea cheap o hose blew a holed

[Cummins12V98]

Have you tried tightening the fitting or is it actually a hole in the hose? Very normal to need to snug up the fittings.