โJun-02-2019 04:06 PM
โJun-05-2019 07:21 PM
prichardson wrote:Same here. I re-sealed all the vents and it works waaay better. Part of the problem was the ceiling luan plywood was sagging so much that the vents weren't pushed into the duct. I had to use some long #6 screws into the rafters to pull the ceiling up enough.
Unfortunately poor installation is not that uncommon. On a unit I purchased last year (different manufacturer) I had to reseal all the register connections as they were all leaking into the attic area.
โJun-05-2019 05:27 PM
โJun-05-2019 06:14 AM
โJun-05-2019 04:02 AM
โJun-04-2019 07:17 PM
โJun-02-2019 05:52 PM