โOct-09-2012 10:47 AM
โJul-10-2013 03:48 PM
Mike & Tracy Boyd
โOct-11-2012 10:36 AM
โOct-09-2012 07:52 PM
โOct-09-2012 04:29 PM
โOct-09-2012 03:50 PM
โOct-09-2012 03:13 PM
Fizz wrote:
Our table has two pedestals and it wobbled at first.
What you have to do it line it up nice and tight and womp down real hard on the table top exactly over the pedestal. It won't wobble anymore.
โOct-09-2012 03:11 PM
hausfrau wrote:
My new trailer has a u-shape dinette slide-out. Wonderful idea, and we love the space, but after only 3 outings, the table is so wobbly, we can't use it. The single pedestal leg uses the typical cone-shape bases for the crimped-end leg. A close-up photo of the cone insert shows how the metal has fractured, making it unstable. The leg wobbles like crazy, both at the floor and at the table top. I've asked the manufacturer for a replacement. Here's the photo:
Photo of cone base for dinette table leg
โOct-09-2012 02:41 PM
โOct-09-2012 01:23 PM
Fizz wrote:
Our table has two pedestals and it wobbled at first.
What you have to do it line it up nice and tight and womp down real hard on the table top exactly over the pedestal. It won't wobble anymore.
โOct-09-2012 12:31 PM
โOct-09-2012 11:48 AM
โOct-09-2012 10:55 AM
Joy wrote:
You might consider buying and mounting a single pedestal base on it instead. I did that on the dinette booth arrangement we had in the other MH - worked just fine. Cost about $150.
โOct-09-2012 10:52 AM
โOct-09-2012 10:49 AM