โJul-17-2017 12:43 PM
โJul-20-2017 06:20 PM
โJul-19-2017 09:09 PM
โJul-19-2017 08:46 PM
โJul-18-2017 01:42 PM
Ramblin' Ralph wrote:
Thanks for all the tips!
I tried the "dollar bill" one and found that about a 6" part of the door has much less resistance than the rest. It's around the area that curves downward from horizontal to a slant.
I put a couple of layers of black electrical tape in two places on the door where I thought it would be contacting the rubber seals. Definitely increased the resistance of the bill. Will be driving to a new campground today and will report back the results when I have a Net connection.
โJul-18-2017 11:11 AM
โJul-18-2017 05:08 AM
โJul-18-2017 04:32 AM
AJBert wrote:
If none of the above works out, take a look at the hinge pin holes. They may have worn themselves out throwing off the alignment.
โJul-17-2017 08:20 PM
โJul-17-2017 07:18 PM
โJul-17-2017 04:15 PM
โJul-17-2017 03:30 PM
โJul-17-2017 03:24 PM
โJul-17-2017 01:10 PM
โJul-17-2017 12:49 PM