Brake Lights

[fantasy_islande]

Doing a check as we prepare to leave for home, and the brake lights are not working. No voltage on the power lead, 20A fuse is good. FTL raised rail chassis.

[MEXICOWANDERER]

Separate tear lamps
One for turn
A second for brake lights?

Yes it's important to know

[midnightsadie]

did you pull an clean the fuse? some times they crud up. been there.

[fantasy_islande]

Thanks to all for prompt replies.
I also found no power to the hitch brake pin.
Both fuses are good and have 12V.
I now remember that the brake did not disconnect cruise when we came down.
I agree that suggests a defective switch, but I've looked at the pedal area, and the only connection I see coming out of it is the pedal motor.
I looked at the firewall, but there are a thousand wires, and I have no idea what the switch should look like if it's there.
I'll call FTL for direction.
Thanks again.

[opnspaces]

Do the emergency flashers work?

[Lwiddis]

Ground first IMO.

[Cobra21]

Optimistic Paranoid wrote:
If you're SURE the fuse is good, I'd be checking the brake light switch next.

Brake light switch at pedal and the ground.
Brian

[Optimistic_Para]

If you're SURE the fuse is good, I'd be checking the brake light switch next.

[ScottG]

Is there power at that 20A fuse when you check with a meter?