โMar-27-2018 10:03 PM
โMar-28-2018 07:44 PM
โMar-28-2018 07:36 PM
โMar-28-2018 07:11 PM
โMar-28-2018 06:49 PM
opnspaces wrote:
Thanks for all the responses. I hadn't considered the flexing and work hardening aspect. I might also look into the starter cables from the car parts store. Though I wonder if those are really copper plated aluminum like most of the cheap jumper cable sets.
โMar-28-2018 06:17 PM
โMar-28-2018 05:39 AM
opnspaces wrote:
I want to use my 600W inverter on my trailer. My current plan is to mount it in a box on the tongue keeping wire length to about 18 inches.
My question: I have a lot of 4awg wire that I used years ago on a hot tub at home. Can I use this wire on my inverter? It's very stiff and not at all flexible like the welding cable that everyone suggests.
โMar-28-2018 04:38 AM
โMar-27-2018 10:56 PM
โMar-27-2018 10:10 PM
โMar-27-2018 10:09 PM